View Single Post
Old 10-15-2016, 08:30 AM   #37041
BLU DUCE


 
BLU DUCE's Avatar
 
Drives: 2011 1SS/RS IBM Camaro
Join Date: Jan 2011
Location: Chittenango, NY, USA
Posts: 7,219
Don't make a big mistake like I did. I had the Expel put on a little expensive. I learned the hard way. Took the camaro in had the pieces put on the pillars,mirrors,6 inches on the roof over the top of the windshield,rockers,driving & headlights, full front fascia.

This product is very strong against stone chips. My whole rant on this is they had a person put it on that had never done it. They did not have a decaminated area like a paint booth to do this in. And all these pieces are pre-cut on a machine.

When I went to pick the car up I inspected every inch of it. I have a very short fuse temper I expect perfection for my money. The clear shield had little white spots under it on the pillars,rockers,& the piece across the roof. They told me the spots would work their way out in a couple of days.

Well after fighting them for 2 years they finally changed the pieces. But guess what
same situation. Dirt specs under the E-xpel again and no clean area to do the job. They had a fan going which is blowing dust all over the place. I won't mention the place on here cause of law action going on now.
__________________
BLU DUCE is offline   Reply With Quote