[Mr Twisty]

Originally Posted by blake-b

I wouldn't worry about the bolt bounce as long as the gun ran.

I'd run to a Lowes, HD, ACE, and A #60 O-ring. If they worked, I'd order this:
http://www.bravocompanyusa.com/BCM-E...exspring-1.htm
The reason is because the hardware store version will likely be buna rubber and will deteriorate. The others are viton. With the BCM kit, you may not need it because the spring is so strong. It would be a cheap test to see if it fixes it.

I'll put that on my shopping list, thanks. I may have confused you and never clarified, I'm getting failure to eject. The extractor has been working as far as I can tell, but I can see where extractor could affect ejection.


I watched a Tubb video on buffer springs, he also sells extractor/ejector spring kit. If the o-ring works I may just throw the Tubb springs in. It's a long vid but informative. His buffer spring may stop the bounce as well.

I just don't like that bounce, seems it's going into battery twice, hard, then soft. I'd like to see slo-mo vid of an original Stoner doing it, then I may feel better about it.

Tubb vid: