Chevrolet Corvette Stingray C7 Forum - View Single Post - 2015 Mustang-FRPP Drag Mods and Times

Erik427 · 11-13-2014, 07:14 PM

MIHOVETZ just went 5.92 thru the quarter and 3.92 in the 1/8! This was done with a production 4.6 block and heads. The displacement was 281 cubes. Valvetrain is mostly stock and the crank might be. Something had to be done, the imports were closing in fast at a 6.09 with a production block and head. The imports get a major weight break too.

11-13-2014, 07:14 PM	#162
Erik427 Drives: 1970 Camaro, 2011 Mustang GT, 2011 Join Date: Sep 2014 Location: Huntington WV Posts: 89	MIHOVETZ just went 5.92 thru the quarter and 3.92 in the 1/8! This was done with a production 4.6 block and heads. The displacement was 281 cubes. Valvetrain is mostly stock and the crank might be. Something had to be done, the imports were closing in fast at a 6.09 with a production block and head. The imports get a major weight break too.