Chevrolet Corvette Stingray C7 Forum - View Single Post

Hulkamaniac · 05-11-2014, 06:10 PM

The "aeroplate" for the front doubles as a lisence plate bracket.

Just take off Corvette face plate, drill 4 holes through the aeroplate following the conveniently placed guide holes in the back, and screw your plate on.

I actually drilled a few holes in my actual lisence plate so I can access the mounting screws so I can take it off at shows or at night.

Yes, those are Harley Davidson Skull Lisence Plate Bolts.

05-11-2014, 06:10 PM	#9
Hulkamaniac Livin' the Dream Drives: '23 Charger GT, '23 Stingray Join Date: Mar 2013 Location: Hiding in your closet... Posts: 784 View My Garage	The "aeroplate" for the front doubles as a lisence plate bracket. Just take off Corvette face plate, drill 4 holes through the aeroplate following the conveniently placed guide holes in the back, and screw your plate on. I actually drilled a few holes in my actual lisence plate so I can access the mounting screws so I can take it off at shows or at night. Yes, those are Harley Davidson Skull Lisence Plate Bolts. Attached Images __________________ If you spell Chuck Norris in Scrabble, you win. Forever. Last edited by Hulkamaniac; 05-11-2014 at 06:24 PM.