Quote:
Originally Posted by Tayap79
Yea, bringing back my college courses on me. So if this is the contact is bad the passenger window won't work because the NC contact is no good right?? Hate it cause these things are expensive to replace if I can't get the module apart to try and fix it.
|
It is a possibility. I'll post a picture of what I've worked on, probably similar. The switch tops have a catch on either side in the middle, they all need to be pried off. Most of the little catches are broken on my son's since I've done it twice but they still will stay on enough. Once you have all the rockers tops off you can pull out the white bottom portion and then pull the whole module out of the black casing. Then each switch rocker can be removed to access the switch contacts. Pay close attention to the location and orientation. I was able to clean up the contacts on my son's and get it working. The drivers window rocker had one of the little spring loaded nibs worn down, filed a point back on it and stretched the little spring a bit and swapped that rocker for a back window one that doesn't get used much.