Quote:
Originally Posted by menendez1293
Honestly if it were me what I would do is try to find a V6 (preferably LLT) with the brace and ask politely if they could measure the distance from the plenum cover to the brace. If the distance is greater than 1 inch it will fit if not then there is no brace compatible with the mace spacer. There has to be At least 1 2011 vert on this forum that you can ask.
|
Post #2 of this thread:
http://www.camaro5.com/forums/showthread.php?t=217333
There's about 37mm between the IM and OEM brace (no isolator installed at the time when I measured it). That's w/o the strut bar adapter kit - which may give added clearance(?). So the 1" isolator should fit under w/o a problem UNLESS there is some dramatic height difference between the 2010 and 2011 towers, but I doubt that. I'll go post this in Botoasy's thread in the suspension section too.