Quote:
Originally Posted by Dragoneye
wait....the Z06 has OnStar...........Lemme call them. Muhahaha |
What On- Star? lol
Short answer:
* Remove fuse (in-car fuse panel)
* Unplug J1, J2, J3 and antenna connectors from onstar module under passenger seat
* Leave J4 connector on onstar module plugged in!
More Detailed Answer..lol
OnStar is EASY to disable....
a) Remove the one and only fuse for OnStar
b) At the back of your car, open the right rear storage compartment, the OnStar module is in there, you might have to pry up the carpet to get at the VCIM (OnStar Module).
c) UNPLUG connectors J1, J2 & J3 ...and UNPLUG the 2 antenna connections. One antenna is for OnStar's GPS signal. (If you have a 3LT car w/NAV, don't worry, the NAV has it's own GPS antenna!) The second antenna is OnStar's Cellular Phone Antenna.
d) The 4th connector, J4, is part of your car's Computer Network Data Bus. LEAVE that connector alone! If you unplug J4, your engine will not start. If you REALLY want the OnStar module out of your car THAT bad, you NEED to install a termination resistance! The "easiest solution" is to just leave the OnStar module in the car with J4 connected! The OnStar module will be TOTALLY DEAD!!