Quote:
Originally Posted by Botoasy
still having problems with my elite catch can, could some1 tell me how to connect the houses. on the factory system does the tube come off of the elbows the go into the intake and from the engine or do I need to cut the hoses off.
|
You do not have to remove the tube from the valve cover. Simply cut the tube in half as shown in the 1st picture. Then where the tube comes out of the intake manifold cut it just a few inches from the elbow that enters the manifold (2nd picture). Now the tube that comes out of the rear passenger valve covers connects to top of the catch can with the supplied 90 degree elbow. The tube that comes out of the intake manifold connects to other hole on the catch can
Simple. Now your CC may be attached to the radiator. Mine is on the other side so don't let it confuse you. Elite just now started sending out the new mount.
Where you cut the stock tube is where you connect the supplied ribber hose
Sent from my DROID RAZR using Tapatalk 2