gee..where ya been? jk
2012 FORD MUSTANG BOSS 302
TECHNICAL SPECIFICATIONS
Gear ratios
1st 3.66
2nd 2.43
3rd 1.69
4th 1.32
5th 1.00
6th 0.65
Final drive 3.73:1
BODY
Construction Unitized welded steel body, aluminum hood
Final assembly location Flat Rock, Mich.
POWERTRAIN AND CHASSIS
ENGINE
Type High-performance 5.0-liter, four-valve Ti-VCT V8
Manufacturing location Windsor (Ontario) Engine Plant
Configuration Aluminum block and heads
Intake manifold Composite shell-welded with runner pack
Exhaust manifold Stainless steel tubular headers, quad exhaust tips
Redline 7,500 rpm
Valvetrain DOHC, four valves per cylinder, variable intake, variable camshaft timing
Valve diameter/lift (mm) Intake 37/12, exhaust 31/11
Ti-VCT operating range 50 degrees for both intake and exhaust
Pistons Forged aluminum
Connecting rods Forged steel
Ignition High-energy coil-on-plug
Bore x stroke 3.63 x 3.65-in./92.2 x 92.7-mm
Displacement 302 cu. in./4,951 cc
Compression ratio 11.0:1
Engine control system PCM
Horsepower 444
Horsepower per liter 88.8
Torque 380 lb.-ft.
Required fuel 87 octane (premium fuel recommended)
Fuel capacity 16 gallons
Fuel delivery Sequential mechanical returnless
Oil capacity 8.5 quarts with filter (10,000-mile service interval)
DRIVETRAIN
Layout Front-engine/rear-wheel-drive
TRANSMISSION
Standard Six-speed manual
2012 FORD MUSTANG BOSS 302 TECHNICAL SPECIFICATIONS
SUSPENSION
Front Independent MacPherson strut with reverse-L lower control arm, 34.6-mm
tubular stabilizer bar, strut tower brace, manual adjustable strut damping
Rear Three-link solid axle with limited-slip differential, performance coil springs,
Panhard bar, 25-mm stabilizer bar and manual adjustable shock damping
STEERING
Type Rack-and-pinion with electric power-assisted steering (EPAS)
Ratio 15.9:1
Turning circle, curb-to-curb 39.4 ft. (est.)
BRAKES
Type Four-wheel power disc brakes with four-sensor, four-channel
anti-lock braking system (ABS), low-expansion brake hoses
Front 355-mm (14-in.) x 32-mm vented discs, four-piston Brembo™
40/44-mm fixed aluminum calipers
Rear 300-mm (11.8-in.) x 19-mm vented discs, single-piston
43-mm floating iron calipers, Performance Friction Compound pads
TIRES AND WHEELS
Standard
255/40R-19 Pirelli PZero max performance, 285/35R-19 Pirelli PZero max
performance;
19 x 9-in., 19 x 9.5-in. wide-spoke painted aluminum wheels, standard tire
mobility kit
DIMENSIONS (inches unless otherwise noted)
EXTERIOR
Wheelbase 107.1
Overall length 188.1
Overall width 73.9
Overall height 55.1
Track, front/rear 61.9/62.5
INTERIOR
Seating capacity Four
Front headroom 38.5
Front legroom 42.4
Front shoulder room 55.3
Front hip room 53.4
Rear headroom 34.7
Rear legroom 29.8
Rear shoulder room 51.6
Rear hip room 46.8
WEIGHTS AND CAPACITIES
SAE passenger volume 83.3 cu. ft.
Cargo volume 13.4 cu. ft.
Maximum towing capacity n/a
2012 FORD MUSTANG BOSS 302 TECHNICAL SPECIFICATIONS
FUEL ECONOMY
Six-speed manual 17 mpg city/26 mpg highway
BASE CURB WEIGHT
Manual transmission 3,632 pounds
Weight distribution (front/rear) 55/45