View Single Post
Old 12-02-2022, 04:14 AM   #8
wrankin
Camaros Of Northwest Ohio
 
Drives: 2016 Black 2SS
Join Date: Nov 2013
Location: Perrysburg OH
Posts: 878
Quote:
Originally Posted by Spaceme1117 View Post
Just put some extra air in them say about 40 psi. They will be fine. The problems with cracking are only if you drive with them in sub-freezing temps.
Quote:
Originally Posted by Nothing like an SS View Post
This, I have done this and no issues. I just put it away for the third winter.

Over inflate, prevents flat spots, and just don't let the car move at all when below freezing.
This Spring mine will be changed due to wear, not damage.

Nothing to worry about! Tires will be fine.
Quote:
Originally Posted by WhiteMale View Post
Is your storage space going to have any heat, or not? If there's no heat, at all, and basically subject to whatever the temps drop to, I would go with over inflation, also as stated the worse part of summer tires in cold temps is the flexing that occurs during driving is the real problem. Though I would worry about summer tires in the bare cold just sitting there. I swap wheels and tires each season and my summers stay in the garage where I have a little heat and it's generally 50 degrees at worst.
Quote:
Originally Posted by Nothing like an SS View Post
My garage is not heated and has seen temps below 10 degrees for days during the winters. No issues at all for several seasons now. Just don't MOVE the car when it is cold, it will be fine when overinflated. I actually go 10 over, so 42 psi
Thanks for all of the responses - I checked in with a Goodyear tire engineer ( recent autocross national champ), and everyone agrees, that they should be just fine, as long as the car isn't moved when it's cold. I will also overinflate as recommended here.

Thanks again,
Bill
__________________
2023 2SS 1LE Red Hot
2016 2SS Black / Black & Arenaline Red (sold)
2023 GMC Canyon Denali
2013 2SS / RS - AGM / Jet Black (sold)
1970 1/2 Z/28 Classic Copper / Tan (sold many years ago)
wrankin is offline   Reply With Quote