[acammer]

Originally Posted by LS1Formulation

I do know weather and DA play a part, but unfortunately, I don't know what the DA was that day. It was 80°, and I know that can slow a car down, but I ran some of my best times late July last year in hotter temps than that. I will say, as to what acammer posted, that problem with the launch table sounds exactly like what my car does when I launch. Is the fix to have that table adjusted or simply disabled, and to install a two step? If so, I'll do that and report back. After I get a truetrac installed first... My spider gears decided to shatter on me.

Here are my runs:

1.9593 - 60'
5.4211 - 330'
8.2586 - 1/8
88.72 mph
10.6395 - 1000'
102.18 mph
12.6521 - 1/4
112.70 mph

1.9576 - 60'
5.4077 - 330'
8.2377 - 1/8
88.92 mph
10.6215 - 1000'
101.65 mph
12.6434 - 1/4
112.25 mph

It's easy to fix, you just set the wheelspeed vs rpm limiter table to whatever your actual limiter is in the 0 and 9.9mph boxes.

The trap speed looks low, but that's because it's a slug in the front half. It's picking up 24mph in the back half, which isn't stellar, but isn't bad either. When the 60' comes down, the mph will go up.