Chevrolet Corvette Stingray C7 Forum - View Single Post - Modified 6th gen A10: Driveline Concerns regarding drag strip tires

FlukeSS · 02-05-2022, 09:03 AM

Hello,

My 2020 2SS A10 is slightly modified and I heard from several members of the community that you shouldn't run sticky tires on the vehicle on the track because of driveline tolerances related to the automatic transmission.

Can someone elaborate on this please? I am considering a Cam Kit and 416 build for my car, with the consideration of supercharging later, but worry about the driveline.

My shop says they've built a 2021 Camaro with 900hp on the stock driveline but they did specify this was an M6 with an upgrade done to the clutch.

Thanks!

FlukeSS

02-05-2022, 09:03 AM	#1
FlukeSS Drives: 2020 Camaro 2SS A10 Join Date: Jun 2018 Location: Here Posts: 1,809	Modified 6th gen A10: Driveline Concerns regarding drag strip tires Hello, My 2020 2SS A10 is slightly modified and I heard from several members of the community that you shouldn't run sticky tires on the vehicle on the track because of driveline tolerances related to the automatic transmission. Can someone elaborate on this please? I am considering a Cam Kit and 416 build for my car, with the consideration of supercharging later, but worry about the driveline. My shop says they've built a 2021 Camaro with 900hp on the stock driveline but they did specify this was an M6 with an upgrade done to the clutch. Thanks! FlukeSS __________________ 2020 Camaro 2SS A10 \| Rebuilt by: CBI Street Cars \| 2" SE LT Headers \| 3" SE X-Pipe \| 3" MBRP Axle-Back \| Pri & Sec Cat Deletes \| Roto-Fab CAI \| LT2 Ported \| 95mm ZR1 TB \| LSA crankshaft conversion w/modified crank gear \| LS1 thrust bearing \| Gen V Hinson Plug Wire Set \| BTR 220 Stage I Cam \| ARP Rod Bolts \| Delphi Lifter set \| NGK LTR6IX-11 spark plug set \| DOD Delete \| VVT Limiter \| ECM, TCM & E85 \| Retuned by: Justin L. \| Dyno: 510 rwhp 472 rwtq \| Best 1/4 Time: 11.639 Last edited by FlukeSS; 02-05-2022 at 09:14 AM.