CAMARO6 - View Single Post

Elite Engineering · 09-03-2018, 05:56 PM

You have a GDI engine and need to stop all of the oil, not just a small amount. Here is the result of the "catchcan challenge" performed with the JLT can as an example compared to our patented design that traps approximately 95%:

https://themustangsource.com/forums/...art-2-a-532449/

You can do this test against any catchcan to see how effective they are, just as PolynesianPowerhouse did here.

Good reads https://www.camaro6.com/forums/showthread.php?t=512223

The purpose of installing a catchcan is to stop the ingestion that causes the intake valve coking as well as reduce knock retard caused by these substances when ingested. No other design comes close to our E2-X design.

Contact us for technical questions direct at: Tech@EliteEngineeringUSA.com and Sales@EliteEngineeringUSA.com

Cheers!

09-03-2018, 05:56 PM	#6
Elite Engineering Drives: 2010 Camaro Join Date: Nov 2009 Location: Denver Posts: 1,383	You have a GDI engine and need to stop all of the oil, not just a small amount. Here is the result of the "catchcan challenge" performed with the JLT can as an example compared to our patented design that traps approximately 95%: https://themustangsource.com/forums/...art-2-a-532449/ You can do this test against any catchcan to see how effective they are, just as PolynesianPowerhouse did here. Good reads https://www.camaro6.com/forums/showthread.php?t=512223 The purpose of installing a catchcan is to stop the ingestion that causes the intake valve coking as well as reduce knock retard caused by these substances when ingested. No other design comes close to our E2-X design. Contact us for technical questions direct at: Tech@EliteEngineeringUSA.com and Sales@EliteEngineeringUSA.com Cheers!