CAMARO6

CAMARO6 (https://www.camaro6.com/forums/index.php)
-   ZL1 Discussions (https://www.camaro6.com/forums/forumdisplay.php?f=235)
-   -   Oil pressure after oil vhange (https://www.camaro6.com/forums/showthread.php?t=625118)

george 04-24-2024 07:49 PM

Oil pressure after oil vhange
 
2 Attachment(s)
Did anyone else notice that the oil pressure is a bit higher after a fresh oil change?

Here’s mine

Camfab 04-24-2024 09:08 PM

What was the oil temperature, was it the same in both instances? It’s also possible that the oil was diluted/contaminated with fuel.

Kamero6 04-24-2024 11:50 PM

yes a couple of PSI. It's normal

pauly1119 04-25-2024 04:51 PM

1 Attachment(s)
Mine after oil change.

Z OH 6 04-25-2024 05:02 PM

Colder oil will always be higher so it also depends on ambient temps.

george 04-26-2024 01:21 AM

Yes, it was about 40psi with initial start. As it warmed up, the idle psi went from 40 to 31 when fully warmed up.


All times are GMT -5. The time now is 10:04 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.