Chevrolet Corvette Stingray C7 Forum

Chevrolet Corvette Stingray C7 Forum (https://www.corvette7.com/forums/index.php)
-   Stingray Photos, Videos, Media (https://www.corvette7.com/forums/forumdisplay.php?f=159)
-   -   C7 Carbon Fiber Parts coming soon from Lashway Motorsports (https://www.corvette7.com/forums/showthread.php?t=323347)

Erik@lashway 10-15-2013 10:19 PM

C7 Carbon Fiber Parts coming soon from Lashway Motorsports
 
NEW for the C7! World's finest Carbon Fiber exterior parts exclusively for the Stringray Corvette!

We have developed custom one off parts for the C7 (all trim levels) out of 100% real Carbon Fiber. These parts are entirely made in the USA as well - and we're sticking to that. We partnered with a very reputable composites company for this project and the results are unreal.

The first PROTOTYPE to be released are a beautiful set of side skirts. We will have two style available shortly. The style you see below is what we call our "Race" skirts. There is more visible material, and less contour to the exterior lines of the vehicle. They feature a more aggressive profile.

The second version, which will have the designation of "Street" are more contoured to the exterior lines of the Stringray. They are a bit smaller in width, and less aggressive by design. They are absolutely beautiful and are ideal for someone looking to add just a touch of carbon on their vehicle without going to aggressive on the styling.

Pricing has not yet been determined as these are only prototypes. What you see in the following photos are a third of the overall quality that the production items will be. These were built to give you, the customer, and idea of the overall theme of these parts.

We also offer Kevlar products which allow us to build these identical parts in various colors and finishes - Red, Blue, Purple, Green, Yellow ETC.

Please contact us for more information. Once we have the prototypes dialed-in, we will begin to take pre-orders.

Once again, this is only the test piece. It is a mold that is laminated with real CF. The final production parts will be entirely made of CF, and will have a better finish than this.

http://i1124.photobucket.com/albums/...ps8c70ceb7.jpg

http://i1124.photobucket.com/albums/...ps7709822e.jpg

http://i1124.photobucket.com/albums/...ps5ea01811.jpg

http://i1124.photobucket.com/albums/...ps53e4c2f8.jpg

http://i1124.photobucket.com/albums/...ps812dbf59.jpg

GQ4Life 10-15-2013 10:44 PM

looks good

Erik@lashway 10-15-2013 10:56 PM

Thank you very much. Wait until you see the entire line up of items which will be available for purchase. Absolutely beautiful, classy, tasteful, and affordable!

FEAR 10-16-2013 09:13 AM

looks good! lets see some shots from farther away, im local, and these have peaked my interest

Erik@lashway 10-16-2013 02:35 PM

Quote:

Originally Posted by FEAR (Post 7097326)
looks good! lets see some shots from farther away, im local, and these have peaked my interest


We are still using the vehicle for other product development, and are waiting on some wheels to do a formal "shoot" at various angles.

If you'd like, come on by and check it out in person!

Erik@Lashway

Bigcros 10-16-2013 03:16 PM

If I had a C7, I'd buy them!

Erik@lashway 10-17-2013 07:03 AM

Thank you.

The "Street" version are really nice, and have more of a contour of the side of the rocker and door. More of a tasteful item. The "Race" version shows more material and also looks stunning, but is not as "custom" built for this vehicle.

Stay tuned...

Jabs 10-17-2013 09:50 AM

I can't wait to see the products!!!

purpleRac3r 10-17-2013 09:14 PM

Erik, a thought I've had for a carbon part is a strip that mounts (probably via trim tape) between the rear hatch glass and the removable roof panel, and just the width of the exposed carbon and glass. I think this could really enhance the "spear" effect of the painted edge on the exposed carbon tops if done with the same weave and gloss of the OEM top. Strictly cosmetic, I know, but would really enhance the appearance of the factory top and your ground effects kits. Any chance of you developing such a piece?

texasray 10-18-2013 12:08 AM

Looks very good. Thanks for being a pioneer and providing aftermarket parts so quickly. Can't wait to see what else you have lined up :)

Erik@lashway 10-18-2013 11:17 AM

Quote:

Originally Posted by purpleRac3r (Post 7102970)
Erik, a thought I've had for a carbon part is a strip that mounts (probably via trim tape) between the rear hatch glass and the removable roof panel, and just the width of the exposed carbon and glass. I think this could really enhance the "spear" effect of the painted edge on the exposed carbon tops if done with the same weave and gloss of the OEM top. Strictly cosmetic, I know, but would really enhance the appearance of the factory top and your ground effects kits. Any chance of you developing such a piece?

Yes Sir...

With our partner G3 Composites, we can build anything you want - even one off creations for your specific needs.

Give me a call - (954) 971 4383

Erik

Erik@lashway 10-18-2013 11:17 AM

Quote:

Originally Posted by texasray (Post 7103367)
Looks very good. Thanks for being a pioneer and providing aftermarket parts so quickly. Can't wait to see what else you have lined up :)

Thanks so much!

Wait until you see the "street" version of these skirts - mmmmmmm

Erik@Lashway

GunnyG 10-18-2013 05:45 PM

I like what I see! :drool::thumbsup:

Erik@lashway 10-20-2013 09:17 PM

Quote:

Originally Posted by GunnyG (Post 7105447)
I like what I see! :drool::thumbsup:


Thanks a lot! Can't wait to release these products to the general public!

Erik@Lashway


All times are GMT -5. The time now is 02:25 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.