FS: CUSTOM CRASH BAR + AIR DEFLECTORS
8 Attachment(s)
Happy Friday Everyone...
Worked up a quick 3D model... Still not the final version, but made some changes to the general assembly. 1. The upper and lower hoops will now be a one-piece round tube, that sets into the wider 1.5" x 2" vertical support. 2. Will be adding compression sleeves to the (8) bolt locations. 3. Will be boxing the outside ends of the stacked 1x2. 4. Will be passing the stacked 1x2 through the verticals for better strength, which will also push the vertical another 3/8" away from the HX. 5. All parts will be laser cut for better precision. 6. Not shown here, but 2 small changes to the air deflector fitment. So, here is the call to action. I crunched some numbers, reviewed the previous "interested" list... and am ready to move forward with a first batch of (15). Cost: $1,500 (primed and painted) includes packaging (shipping cost extra) Deduct approx. $150 to ship this out without paint or primer. Once I can get (15) committed orders, I will pull my car apart again, create the jig, install instructions, order new parts, test again, make any final adjustments, before building. I would be asking for a $400 deposit, and should be able to ship all (15) in about 4 weeks. With that said... please confirm you want your name to stay on this list, and please let me know who wants to be added to the list. I am super excited to be able to share this design with everyone! Order List: 1. Z OH 6 2. Radz28 3. ZL1…SON 4. H018871 5. CamOnlyJabroni 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Build thread can be found HERE... https://www.camaro6.com/forums/showthread.php?t=619537 |
Will these fit a prochargers intercooler?
|
That's a great question.... and I do not know the answer... I know there are some install instructions with photos around here, if you send them to me, I can try an evaluate based on the photos.
|
1 Attachment(s)
Found this... looks like my design would not. Would need to create an alternate design, which I would do... if there were at least (15) people who wanted one, and someone could send me the intercooler to mount on my car, to work with for a week or two. Let me know. Thoughts?
|
Updated list... I need (9) more for the first production run... any other takers?
Order List: 1. Z OH 6 2. ZLElvira 3. ZL1…SON 4. H018871 5. CamOnlyJabroni 6. blahson 7. 8. 9. 10. 11. 12. 13. 14. 15. |
Quote:
|
Quote:
Thank you... I'd love to get my hands on one, to see how I could integrate in some brackets to accept it... |
Order List:
1. Z OH 6 2. ZLElvira 3. ZL1…SON 4. H018871 5. CamOnlyJabroni 6. blahson 7. 1wraith76 8. 9. 10. I only need a few more to run the first batch of 10... Anyone else want one? |
I am interested 2 of these, if I can still get on the list?
|
Quote:
Awesome... thank you for the interest... Current Order List: 1. Z OH 6 2. ZLElvira 3. ZL1…SON 4. H018871 5. 1wraith76 6. blahson 7. DennyOfficial 8. DennyOfficial 9. 10. I only need TWO MORE to run the first batch of 10... Who else wants one??? I am ready to work on these for you, just need TWO MORE :wave: |
I would have no use currently but it they fit the SS also you could post there also. It does look appealing though.
|
Quote:
|
Current Order List:
1. Z OH 6 2. ZLElvira 3. ZL1…SON 4. H018871 5. 1wraith76 6. blahson 7. DennyOfficial 8. DennyOfficial 9. adub4185 10. I only need ONE MORE to run the first batch of 10... Who else wants one??? Also, for everyone on the list currently, please send me a private message with your email and cell number... need to discuss the final details with you. Lets get this party started! |
I am ready to GEAUX!!! I'm ready to tear into this front end! My YouTube Channel has blown-up over the new content with 500,000 views in the past 72 hours... 6400 Subs!! I need to get this video content up ASAP! I am going to order the Dedicated heat exchangers and the custom dual pass oil cooler this week.
|
All times are GMT -5. The time now is 10:04 AM. |
Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.