What did you do to your 6th Gen Camaro today?! - Page 1066

ZPirate · 03-25-2024, 02:46 AM

Quote:

Originally Posted by shippingguy

Installed my new Velgen VF9 Lightweight Series wheels in Gloss Metallic on my ‘24 ZL1-M6. They match the splitter, side rockers and rear diffuser perfect.

I've been thinking about a set of gloss black wheels for my ZL1 to match the Mosaic Black trim pieces. I've been thinking about doing my 1LE wheels gloss black, but those look nice too. Are they oem ZL1 sizes?

shippingguy · 03-25-2024, 09:18 AM

Quote:

Originally Posted by ZPirate

I've been thinking about a set of gloss black wheels for my ZL1 to match the Mosaic Black trim pieces. I've been thinking about doing my 1LE wheels gloss black, but those look nice too. Are they oem ZL1 sizes?

Yes they are OEM. The front is same at stock with 20x10 ET20 offset. The rear is 20x11 with ET40 offset. Stock is ET43 so these fit flush with fenders better than stock. They fit in rear as if you had a 3mm spacer on the factory ones.

Camby · 03-25-2024, 03:56 PM

Added these to the trunk, just in case. Had to cut a small piece of the black styrofoam to make it fit. Then washed her.

Sent from my iPhone using Tapatalk

CalgaryZL1 · 03-25-2024, 05:27 PM

Is there a survival blanket and a candle for when the freak snow storm hits and you run out of gas stuck on the highway?

ChrisMal · 03-25-2024, 07:02 PM

Took her out for a 200 mile drive to get up to 1500 yesterday, beautiful day for a drive. Ticked over to 1503 pulling in the driveway.

Today I changed engine oil, filter, differential fluid, and flushed the brakes, replacing the stock fluid with endless 650. Now she's all ready for her first track day at CMP for the NASA Sinko de Mayo event. This will be significantly faster than my last track car a decade ago, but that 09 RX8 R3 was a fun car on the track. Looking forward to that.

Installed one of those no tool oil plug/drains at the 500 mile change and was nice to use this time, a little slow, but easy, clean and straight to the jug. Nice not having to dump 10 quarts of oil from the drain pan into the jug.

I was concerned that the Quick Jack I had might be too long for this car, but turns out the 6000 elx just fits, makes my life easier. Name: 20240325_112238.jpg
Views: 386
Size: 236.7 KB

Name: 20240325_112238.jpg
Views: 386
Size: 236.7 KB

Big Swole · 03-25-2024, 08:08 PM

I didn't do anything "To" it but got home at 4AM after driving it 500 miles (Trip to the Tail of the Dragon)...

Still shaking it down and was testing the modes and TC / SC levels... Also still learning to edit vids... I suck at it, I know.

.

Caerus · 03-25-2024, 08:28 PM

Quote:

Originally Posted by ChrisMal

Now she's all ready for her first track day at CMP for the NASA Sinko de Mayo event.

Welcome to the forum. CMP is such a fun track. I have lot's of seat time there, since I live less than an hour from that track. Enjoy the new ride and the Camaro is very suited to that track.

ChrisMal · 03-25-2024, 09:58 PM

Quote:

Originally Posted by Caerus

Welcome to the forum. CMP is such a fun track. I have lot's of seat time there, since I live less than an hour from that track. Enjoy the new ride and the Camaro is very suited to that track.

Thanks. I have gathered a lot of great info here.

Yes I remember it being a lot of fun, only have the one weekend there. Been reviewing the videos I took. RA and Roebling are the places I have the most seat time, but the corners will come up a lot faster now. 232 hp (optimistically at the crank) and no torque vs 450 and actual torque will be different.

z28pat · 03-26-2024, 10:55 AM

Added the Cadillac door striker covers.
Adds a nice touch to the car.

arpad_m · 03-26-2024, 02:36 PM

Quote:

Originally Posted by z28pat

Added the Cadillac door striker covers.
Adds a nice touch to the car.

The way it should've come from the factory

(For others' sake, the part number for the Camaro is 13574802 and not what the bag says in the photo.)

Curr · 03-26-2024, 02:39 PM

Quote:

Originally Posted by arpad_m

The way it should've come from the factory

(For others' sake, the part number for the Camaro is 13574802 and not what the bag says in the photo.)

Thank you, sir.

Zapote21 · 03-26-2024, 03:49 PM

Drove the Dragon on Monday!

Dirtbike · 03-26-2024, 10:54 PM

Installed:
-Hurst shifter
-Speeddawg 1LE shift knob
-JXB driveshaft bearing support

Curr · 03-27-2024, 03:10 PM

How do you like it compared to the stock short throw?

03-25-2024, 03:56 PM	#14913
Camby Drives: 2023/2SS/1LE/RadiantRed/A10 Join Date: Jul 2022 Location: Great Lakes Posts: 314	Added these to the trunk, just in case. Had to cut a small piece of the black styrofoam to make it fit. Then washed her. Sent from my iPhone using Tapatalk __________________ 2023/2SS/1LE/Radiant-Red/A10/Sunroof/Copper-Free-Breaks/Navigation —— Order History: 6/17/22-1100, 3/7/23-3000, TPW-4/3/23, 4/4/23-3800, 4/8/23-Delivered

03-26-2024, 10:55 AM	#14919
z28pat Drives: 2002 z28, 2018 2ss 1LE Join Date: Sep 2012 Location: Parrish, Florida Posts: 836	Added the Cadillac door striker covers. Adds a nice touch to the car. Attached Images __________________ Last edited by z28pat; 03-26-2024 at 11:16 AM.

03-26-2024, 03:49 PM	#14922
Zapote21 Tampa Bay Camaros Drives: 2017 Krypton Green 2SS Join Date: Jul 2011 Location: Westfield, IN Posts: 1,021 View My Garage	Drove the Dragon on Monday! Attached Images __________________ Me and wife, in order 2011 2SS SGM 2013 2SS Hot wheels vert 2016 C7 DSOM 2012 2SS yellow vert 2017 2LT Krypton Green 2018 2LT Hot wheels crush 2020 2SS Shock vert. 2017 2SS Krypton Green coupe

03-26-2024, 10:54 PM	#14923
Dirtbike Drives: Chevrolet Camaro Join Date: Feb 2020 Location: AL Posts: 39	Installed: -Hurst shifter -Speeddawg 1LE shift knob -JXB driveshaft bearing support Attached Images

03-27-2024, 03:10 PM	#14924
Curr Probably doesn't like you Drives: 2022 WCT ZL1 M6 Join Date: Jun 2015 Location: Boston-ish Posts: 1,252	How do you like it compared to the stock short throw? __________________ I hope the 6th gen Camaro has a melodious horn trumpet. I'll tootel it at the ladies, yelling out "Hi hi." - RenegadeXR كافر ΜΟΛΩΝ ΛΑΒΕ железобетонное очко Quod gratis asseritur, gratis negatur. There is an unequal amount of good and bad in most things, the trick is to work out the ratio and act accordingly.

03-25-2024, 05:27 PM	#14914
CalgaryZL1 Drives: 2020 Chevy Camaro ZL1 Join Date: Apr 2023 Location: Calgary Canada Posts: 1,483	Is there a survival blanket and a candle for when the freak snow storm hits and you run out of gas stuck on the highway?

03-25-2024, 07:02 PM	#14915
ChrisMal Drives: 23 Camaro 2SS 1LE Join Date: Jan 2024 Location: GA Posts: 14 View My Garage	Took her out for a 200 mile drive to get up to 1500 yesterday, beautiful day for a drive. Ticked over to 1503 pulling in the driveway. Today I changed engine oil, filter, differential fluid, and flushed the brakes, replacing the stock fluid with endless 650. Now she's all ready for her first track day at CMP for the NASA Sinko de Mayo event. This will be significantly faster than my last track car a decade ago, but that 09 RX8 R3 was a fun car on the track. Looking forward to that. Installed one of those no tool oil plug/drains at the 500 mile change and was nice to use this time, a little slow, but easy, clean and straight to the jug. Nice not having to dump 10 quarts of oil from the drain pan into the jug. I was concerned that the Quick Jack I had might be too long for this car, but turns out the 6000 elx just fits, makes my life easier.

User Name		Remember Me?
Password