Catch can installed, is this normal? - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

HypnotiqSS · 03-17-2014, 02:55 PM

Quote:

Originally Posted by SSGUNNER

Perfectly normal. Made a similar thread of mine at around 100 miles n had about the same amount on mine.

How many miles did you have?

Elite Engineering · 03-18-2014, 04:10 PM

Quote:

Originally Posted by camguynj

What fittings are they ( brass, nickel, chrome) ?

From the picture, these are electroless nickel fittings

376LS3 · 03-18-2014, 04:54 PM

Here's mine at 600 miles. I've emptied it every 100 or miles and it's been half full each time. Only 1 on ramp, as I'm breaking in a new differential. Elite catch can also.

HypnotiqSS · 03-18-2014, 05:32 PM

Quote:

Originally Posted by Elite Engineering

From the picture, these are electroless nickel fittings

I'm not sure it's that's another name for chrome, but chrome is what I ordered lol

SSGUNNER · 03-19-2014, 11:37 AM

Quote:

Originally Posted by HypnotiqSS

How many miles did you have?

I had put about 90-100 miles. Installed a sat n checked the following sat and there was that gunk. It's been about a month 1/2 since then. Currently at 26300

Camaro Dude · 05-16-2014, 03:36 PM

Quote:

Originally Posted by HypnotiqSS

Ok so the fittings are chrome. Also if do the valley leak test, is this covered under warrenty? Mods are in the sig.

What method does the dealer use to perform a valley cover leak test?

I'm thinking of bringing mine in as well.

03-18-2014, 04:54 PM	#31
376LS3 Eh, that'll happen Drives: 2010 2SS Join Date: Apr 2012 Location: Mesa, Arizona Posts: 1,841	Here's mine at 600 miles. I've emptied it every 100 or miles and it's been half full each time. Only 1 on ramp, as I'm breaking in a new differential. Elite catch can also. Attached Images __________________ 2010 Camaro SS LS3 - No Modz Last edited by 376LS3; 03-18-2014 at 05:41 PM.