05-24-2014, 05:22 PM | #1 |
Drives: 2014 Vette Stingray,2017 Camaro 2SS Join Date: Oct 2012
Location: Idaho
Posts: 302
|
License plate bracket and aero plate
I hope someone can answer this question. Do all 2014 Corvette Stingrays come with the license plate bracket and the areo bracket that some people are modifying and using for a license plate bracket. My Vette arrived a couple of day ago and I do not remember seeing the areo bracket in the back of the car with the rest of the accessories or on the front for that matter. I would check it out but will not be able to get to the vehicle until Tuesday. Any assistance would be greatly appreciated. Thanks for your time.
Cheers, Mj |
05-24-2014, 06:54 PM | #2 |
Drives: 2014 Corvette Coupe Join Date: Mar 2014
Location: Ohio
Posts: 171
|
Yes they should have both
|
05-24-2014, 09:23 PM | #3 |
Drives: 1974 & 2014 Corvette Stingrays Join Date: Mar 2013
Location: Troy, Mo
Posts: 623
|
Slight correction: every Stingray comes with the 2-piece aero panel. Only cars delivered to dealers in states that require a front license plate also receive the "optional" license bracket, one gawd-awful chunk of plastic that rides high on the nose. Either way, it should be in the trunk or on the car at delivery. If you didn't receive them, go back to your dealer. The PDI person probably forgot to put it back in the car.
On a similar note, if you have a Z51, make sure you have the front rotor cooling rings. While most people will never use them, they are included with the package and should also be in the trunk.
__________________
'74 Stingray coupe, heavily modified, as seen in August 2011 VETTE magazine, 2014 Stingray Z51 #196, ordered 02/11/13, built 08/29/13, Museum Delivery 10/04/13, driven daily!
|
05-25-2014, 03:07 PM | #4 |
Drives: 2014 Vette Stingray,2017 Camaro 2SS Join Date: Oct 2012
Location: Idaho
Posts: 302
|
Thanks for the response and your time.
Cheers, Mj |
05-26-2014, 09:04 AM | #5 |
Drives: 2014 stingray Join Date: Jan 2014
Location: canada
Posts: 12
|
I was wondering about the rotor rings, and if they should have been installed on delivery- thanks for mentioning that.
|
05-26-2014, 10:28 AM | #6 |
Drives: 1974 & 2014 Corvette Stingrays Join Date: Mar 2013
Location: Troy, Mo
Posts: 623
|
The rotor rings should NOT be installed by the dealer! They are for track use only, not casual driving. They should be in a plastic bag with installation instructions and a small spool of wire, and in the trunk.
__________________
'74 Stingray coupe, heavily modified, as seen in August 2011 VETTE magazine, 2014 Stingray Z51 #196, ordered 02/11/13, built 08/29/13, Museum Delivery 10/04/13, driven daily!
|
05-26-2014, 11:09 AM | #7 |
Drives: 2014 stingray Join Date: Jan 2014
Location: canada
Posts: 12
|
|
|
|
|
|