02-09-2014, 05:45 PM | #15 | |
Drives: 2011 RJT Camaro LT2 RS auto shift Join Date: Dec 2011
Location: Washington state
Posts: 1,861
|
Quote:
The white and white/black wires connect to the rca plugs that are marked left front. The gray and gray/black wires connect to the rca plugs that are marked right front The green and green/black wires connect to the rca plugs that are marked left rear The violet and violet/black wires connect to the rca plugs that are marked right rear You do not connect any speakers on the cord with the red, black, yellow wires. Follow the instructions for the rest of the wiring. they are only 7 or wires for you to connect on the power cord. After you got that done then it just connecting very thing to radio and scosche kit.
__________________
Caddy
|
|
02-09-2014, 11:06 PM | #16 |
Drives: 2011 Camaro 2SS/RS Vert Join Date: Jul 2011
Location: Lubbock Texas
Posts: 421
|
Okay, the pioneer head unit came with 2 harnesses, one with a bunch of rca connectors, and the other just has a bunch of wires. In the installation guide it says to connect the colored wires from the second harness to the scosche harness. They match color for color. My question is whats the other harness for? (the one with the rca connectors) what am i supposed to connect to it?
__________________
|
02-10-2014, 12:40 AM | #17 | |
Drives: 2011 RJT Camaro LT2 RS auto shift Join Date: Dec 2011
Location: Washington state
Posts: 1,861
|
Quote:
The white and white/black wires connect to the rca plugs that are marked left front. The gray and gray/black wires connect to the rca plugs that are marked right front The green and green/black wires connect to the rca plugs that are marked left rear The violet and violet/black wires connect to the rca plugs that are marked right rear You do not use the wires from the pioneer unit that match the scosche wire. they are not needed. If you use them any way you could say good by to the ba amp and you will not have any sound period.
__________________
Caddy
|
|
02-10-2014, 11:51 AM | #18 |
Drives: 2011 Camaro 2SS/RS Vert Join Date: Jul 2011
Location: Lubbock Texas
Posts: 421
|
OHHHHHHHH!!! I see!!! Okay! Thank you soooo much! I was sooo confused! Hopefully I get my car back tomorrow so I will get it all put in!
__________________
|
02-10-2014, 03:38 PM | #19 |
Drives: 2013 Join Date: Dec 2013
Location: Germany Blankenhagen
Posts: 81
|
Hallo,
if i understood correct, i have to connect the wires from scosche kit for the speakers with the outputs for the amp and not connecting with outputs, where normaly the Speakers will direct connencted ? Then i have to take my low amp outputs to wire to scosche wires. Thank you so much. Thanks for this tip, my ba amp will live any time longer . Best regards from Germany opossum |
02-12-2014, 10:22 AM | #20 |
Drives: 2011 Camaro 2SS/RS Vert Join Date: Jul 2011
Location: Lubbock Texas
Posts: 421
|
Alrighty, I've got everything wired up, just waiting on my car to get home then ill install and post pics. The install should take less than 30 min if everything goes as planned. I've gotta switch the backup camera from the mirror to the radio, and change my mirror back, so ill have a mirror and harness for sale soon. Hopefully I get my car back soon because Im going out of town again next week and I wanna get this done!
__________________
|
02-12-2014, 01:22 PM | #21 |
Drives: 2013 Join Date: Dec 2013
Location: Germany Blankenhagen
Posts: 81
|
Hallo,
I habe question. Has your mirror for sale homelink included ? Best regards from germany Opossum |
02-12-2014, 09:54 PM | #22 |
Drives: 2011 Camaro 2SS/RS Vert Join Date: Jul 2011
Location: Lubbock Texas
Posts: 421
|
The mirror has onstar, but my homelink buttons are by the map light
This is the mirror: http://www.ebay.com/itm/GM-Autodim-O...-/121273772964 (exact person I bought mine from, and the same one that comes in ofers package.)
__________________
|
02-13-2014, 10:05 PM | #23 |
Drives: 2013 Join Date: Dec 2013
Location: Germany Blankenhagen
Posts: 81
|
Hallo,
thank you for the link. Best regards opossum |
|
|
|
|