*Official* LS3 Dyno Thread - Page 47 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Redtail · 07-25-2016, 07:00 PM

I have a CAI, headers and cat back tsp with a street tune what do y'all think I'm making

Maiden69 · 07-28-2016, 05:48 PM

Got the car tuned yesterday by Corey@HPT. Car was bought with a K&N CAI, OBX headers on, and decided on buying an ebay cat back since I plan on turbo charging the car in the future, and after pricing bends and mufflers in 304 stainless + doing all the work, it was not worth doing it myself. Plus it would be much easier to modify this one already made than to build it in the event that it won't fit properly.

To my surprise, it fitted nice, going to add some resonators to try to eliminate the drone at 1500-2000 rpm, but other than that the system sounds great.

Numbers came at 423 rwhp and 415 tq... pretty decent for Chinese stuff.

SSMY1LE · 09-11-2016, 03:25 PM

-K&N CAI
-1 7/8 long tubes
-GESI Green Hi Flows
-Howards Cams (226/236) (.525/.525) 110 LSA
-Tooley 7.40 pushrods
-Dyno Tune

XxScottxXN · 09-26-2016, 08:12 AM

CAI - intake
BW ported TB
Gwatney intake rod mod
Stainless 1 7/8 headers
Hi flow cats
25% UDP
Howards (226/236) .525/.525 110 cam
Dyno tune

TH Automotve Performance · 10-17-2016, 11:14 AM

Mod list
Stock ls3 short block
G6X3 cam from LG motorsports
PRC 255cc head 66cc Chamber
Kooks 1 7/8 headers
3 inches Kooks exhaust NO CAT!
CAI air intake
Stock 3.42 gear
LG motorsports Z/28R Wheel

WHAMMO · 10-28-2016, 02:51 AM

2" SW LTs & HFC
UD pulley
Halltech CAI
TSP 231 236 111 lsa
Autocal remote tune
NPP
1LE wheels

440rwhp 414rwtq mustang dyno (parasitic loss 19-20%).

FKNGRSY · 11-10-2016, 10:10 PM

Got my car dynoed today. Numbers seem low but the car is a blast to drive.
455WHP/418WTQ
2014 M6 LS3
Night fury cam
Z28 CAI
Kooks 1 7/8 Catless
NPP
4.11 rear end

Not sure whats holding it back from the 470+ whp I see other Night Fury LS3 cars putting down. Exhaust or Intake? Most likely my elevation of 2201FT.

2_C1LEAN · 12-09-2016, 08:42 AM

Dyno's comparing full bolt-ons vs. the blower and cam added last weekend by ADM Performance. Night and day difference, great work by Andy! Mods are listed in signature.

rodrig7521 · 12-16-2016, 01:00 PM

2014 Camaro ss

CAI
Long header
Cam

Pro60modman · 12-22-2016, 01:37 PM

BTR Stage 2 Cam
BTR pushrods, springs, retainers, locks
Kooks headers
Kooks cats - gutted
American Thunder 3"
Ported Intake by me
Ported TB
Rotofab CAI
UD Pulley
Tuned by me

eLeSthree · 03-20-2017, 02:27 PM

2011 M6 ls3 SS
TSP 2inch header no cats
3 inch exhaust
Howards Cams ASA cam 226/236 525/525 110
PAC 1218 Springs
CAI intake
Lashway tune

502/445

HogsFan75 · 04-06-2017, 09:49 PM

Just tuned today. KK Performance Little Rock AR.

509/451 wheel, 93 octane.

z28 CAI
GMPP CNC ported Heads with BTR 660 springs and titanium retainers
Trunion upgrade
BTR Stage 4 cam
Kooks 1 7/8 Headers no cats

Dyno sheet

radametz · 04-24-2017, 12:25 PM

1-7/8" American Racing Headers
Hi-Flo Cats
CAI Cold Air Intake
Dyno Tune
25k miles

435 HP / 436 TQ

Big thanks to Race Proven Motorsports!

RealQuick · 06-16-2017, 10:22 PM

2010 Camaro SS M6
Stock bottom end
AI 280cc heads
235/231 VR cam
Huron Turbo kit with Precision 7675
93 octane + Alky control meth
ZL-1 pump /ADM FPCM/ 1000cc injector @ 65%DC
817rwhp/758rwtq @ 16psi with massive clutch slip (new street slayer twin billet)

09-11-2016, 03:25 PM	#647
SSMY1LE Drives: '14 1LE RS NPP Recaro Join Date: Dec 2013 Location: YYZ Posts: 1,676 View My Garage	-K&N CAI -1 7/8 long tubes -GESI Green Hi Flows -Howards Cams (226/236) (.525/.525) 110 LSA -Tooley 7.40 pushrods -Dyno Tune Attached Images __________________ '14 1LE, Recaro, Cammed, Headers, Hi Flows, CAI, Tuned, 486 RWHP https://www.youtube.com/watch?v=H57UfKCO0EY&feature=youtu.be Last edited by SSMY1LE; 03-03-2019 at 08:57 AM.

09-26-2016, 08:12 AM	#648
XxScottxXN Huge Chevy Fan Drives: 14' 2SS/RS 1LE built 4/22/14 Join Date: Apr 2012 Location: Billings, MT Posts: 838	CAI - intake BW ported TB Gwatney intake rod mod Stainless 1 7/8 headers Hi flow cats 25% UDP Howards (226/236) .525/.525 110 cam Dyno tune Attached Images __________________ 2014 2SS/RS Red Rock Metallic, Recaro seats, sunroof, NPP, Nitto Motivo 275/40/20 front 315/35/20 back, Cold air inductions intake, elite catch can, Stainless Works 1 7/8" long tube headers w/hiflow cats, 20% tint, Intake rod mod by Gwatney Performance, Bo White ported & polished throttle body, powerbond 25% UDP, Howards Cam 226/236 duration- 525/525 lift 110 ....with a WHOLE bunch of fun added!!

10-17-2016, 11:14 AM	#649
TH Automotve Performance Drives: 94 416 stroker Join Date: Dec 2015 Location: Caraquet Posts: 15	G6X3 cam + prc 255 Mod list Stock ls3 short block G6X3 cam from LG motorsports PRC 255cc head 66cc Chamber Kooks 1 7/8 headers 3 inches Kooks exhaust NO CAT! CAI air intake Stock 3.42 gear LG motorsports Z/28R Wheel

10-28-2016, 02:51 AM	#650
WHAMMO Drives: 13' 1LE Join Date: Apr 2012 Location: Canada Posts: 2,642	2" SW LTs & HFC UD pulley Halltech CAI TSP 231 236 111 lsa Autocal remote tune NPP 1LE wheels 440rwhp 414rwtq mustang dyno (parasitic loss 19-20%). __________________ 13' 1LE Old setup: TSP 231-236/Tick 660/.105 PR, UDP, SW LT 2'' & HFC, stock NPP & H pipe, VR-DRX CAI, air scoop, Goertz1 manifold, 102mm BBK, 26" Toyo DRs, Forgestars R17x10 & F18x8, rear seat delete, remote Pat G tune Autocal, 7400 limiter, Spec Mini Twin. 91oct. 11.90@122.3, 0-60ft 2.0 / 11.99@123.6, 0-60ft 2.1 DA+819 ...519RWHP SAE Solid roller SBE LS3, FED, LLSR, 91oct, 605rwhp N/A. Tuned by Pat G. Build by me.

11-10-2016, 10:10 PM	#651
FKNGRSY Drives: 2014 1SS Join Date: May 2014 Location: Canada Posts: 158	Got my car dynoed today. Numbers seem low but the car is a blast to drive. 455WHP/418WTQ 2014 M6 LS3 Night fury cam Z28 CAI Kooks 1 7/8 Catless NPP 4.11 rear end Not sure whats holding it back from the 470+ whp I see other Night Fury LS3 cars putting down. Exhaust or Intake? Most likely my elevation of 2201FT. Last edited by FKNGRSY; 11-11-2016 at 02:10 AM.

07-25-2016, 07:00 PM	#645
Redtail Drives: 2012 ss/rs Join Date: Jun 2016 Location: Louisiana Posts: 12 View My Garage	I have a CAI, headers and cat back tsp with a street tune what do y'all think I'm making

07-28-2016, 05:48 PM	#646
Maiden69 Drives: 2020 Orange Crush 1SS/1LE Join Date: Jun 2016 Location: Boerne Posts: 150	Got the car tuned yesterday by Corey@HPT. Car was bought with a K&N CAI, OBX headers on, and decided on buying an ebay cat back since I plan on turbo charging the car in the future, and after pricing bends and mufflers in 304 stainless + doing all the work, it was not worth doing it myself. Plus it would be much easier to modify this one already made than to build it in the event that it won't fit properly. To my surprise, it fitted nice, going to add some resonators to try to eliminate the drone at 1500-2000 rpm, but other than that the system sounds great. Numbers came at 423 rwhp and 415 tq... pretty decent for Chinese stuff.

12-09-2016, 08:42 AM	#652
2_C1LEAN Drives: "Rocket" Join Date: Oct 2015 Location: TEXAS Posts: 20	Dyno's comparing full bolt-ons vs. the blower and cam added last weekend by ADM Performance. Night and day difference, great work by Andy! Mods are listed in signature. Attached Images __________________ 650rwhp/575rwtq Red Hot 2SS/RS 1LE w/ Recaro buckets // Cold Air Inductions intake // Kooks 1-7/8" LT headers // Borla S-type catback exhaust // Lingenfelter GT9 camshaft // LSA converted // Monster LT1-S twin disk clutch // Ferrada FR1's 10.5F/11.5R wrapped in 275/315 // Brake Performance dimpled and slotted rotors // Hotchkis 1" drop // JL Audio XD1000/5 amp + 12" W6 sub + C2 6.5's

12-16-2016, 01:00 PM	#653
rodrig7521 2014 1LE Drives: 1le Join Date: Sep 2013 Location: United States Posts: 47	2014 camaro ss 2014 Camaro ss CAI Long header Cam Attached Images

12-22-2016, 01:37 PM	#654
Pro60modman Drives: Black, all black. Join Date: Dec 2016 Location: Clarksville, IN Posts: 7	BTR Stage 2 Cam BTR pushrods, springs, retainers, locks Kooks headers Kooks cats - gutted American Thunder 3" Ported Intake by me Ported TB Rotofab CAI UD Pulley Tuned by me Attached Images

03-20-2017, 02:27 PM	#655
eLeSthree Drives: 2011 Camaro SS 6sp Join Date: Nov 2016 Location: Drivers Seat Posts: 1,904	2011 M6 ls3 SS TSP 2inch header no cats 3 inch exhaust Howards Cams ASA cam 226/236 525/525 110 PAC 1218 Springs CAI intake Lashway tune 502/445 Attached Images

04-24-2017, 12:25 PM	#657
radametz Drives: 2013 CRT 2SS/1LE; 2016 Colorado Z71 Join Date: Jul 2008 Location: Edison, NJ Posts: 648 View My Garage	1-7/8" American Racing Headers Hi-Flo Cats CAI Cold Air Intake Dyno Tune 25k miles 435 HP / 436 TQ Big thanks to Race Proven Motorsports! Attached Images __________________

06-16-2017, 10:22 PM	#658
RealQuick Drives: 2010 Camaro 2SS M6 - Intake/Exhaust Join Date: Sep 2014 Location: Bridgewater Posts: 693	2010 Camaro SS M6 Stock bottom end AI 280cc heads 235/231 VR cam Huron Turbo kit with Precision 7675 93 octane + Alky control meth ZL-1 pump /ADM FPCM/ 1000cc injector @ 65%DC 817rwhp/758rwtq @ 16psi with massive clutch slip (new street slayer twin billet)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LS3 dyno results	TinyToasta	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	15	05-14-2012 08:14 AM
LS3 and L99 engine dyno test	ULTRAZLS1	5th Gen Camaro SS LS LT General Discussions	20	09-27-2010 11:52 AM
Texas Speed Engine Dyno L99 Baseline Vs. LS3 Baseline	Jon@Texas-Speed	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	6	07-21-2010 03:55 PM
What's the highest HP/TQ dyno #'s on the site for a STOCK LS3?	topgun1	5th Gen Camaro SS LS LT General Discussions	38	03-24-2010 08:57 PM
My dyno #'s on a stock LS3	victoryred1ss	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	4	03-18-2010 04:05 PM