01-17-2015, 12:28 PM | #1 |
Drives: 2011camaro SS Join Date: Nov 2012
Location: Allen, Tx
Posts: 2,202
|
NEW BOLT ONS SI RECORD!! 11.31 @119.36
Well I set out over a year ago to become the fastest Bolt On Only car and finally got my prize! Went to Royal Purple Raceway last night with hopes of getting that perfect run and I was blessed with 2 perfect passes.
First pass of the night was an 11.34 @119.17. Next pass was 11.31 @ 119.36. DA was around -400 not the killer -1000 I had last time but still great. So here is what we did. Since my last trip to the track a month ago I ran 2 11.453 passes an 11.451 and some 11.47-11.50. There was always some minor issue with each pass. Slightly spin, or stayed in staging lanes for 2+hours and unable to control oil temps for max power which left me just thousands of a sec short from Terry's record time. I had some things I wanted to try. First I called Andy at ADM and told him my plans. He told me "I tell you what, let's don't take any chances on this, we will put it on the dyno 1 last time and get every last HP out of it. He took what I wanted and tweaked the tune! It was SET ON KILL an ALL OUT MAX EFFORT tune! We threw as much timing as it would hold and we were dynoing it in the exact same temp that I would be racing in so the fueling was dead perfect! I left the shop with about 3more RWHP AND 3 more TQ! Andy went way past what I have expected him to do on this tune. He even took wheels off of his V Just to get a more accurate dyno reading. Big thanks to ADM for putting me over the hump and helping set that record! I appreciate all their cooperation and hard work. |
01-17-2015, 01:14 PM | #2 |
Drives: 99 Camaro; 2010 Camaro 2SS/RS Join Date: Nov 2009
Location: louisiana
Posts: 1,966
|
congrats on the run
__________________
2018 Camaro SS A8 Edelbrock 2650 FBO 93 octane 9.54@144 Pump E 9.59@152
2010 Camaro Stock bottom end with 46,000+miles JRE remote tuning Whipple A6 and Drive it to and from the track 9.46@146 |
01-17-2015, 01:24 PM | #3 |
Drives: 2010 camaro ss Join Date: Jun 2010
Location: Port Arthur, Tx
Posts: 2,383
|
I knew I should've went last night. Congrats on the run
|
01-17-2015, 01:27 PM | #4 |
Writer
Drives: 2010 SS / 1967 Camaro Join Date: May 2009
Location: Chicago, IL
Posts: 7,216
|
Congrats Jeff and to those involved, that ET is bad ass!!!! The MPH ain't that bad either.
__________________
PROJECT HEAVY CHEVY
Camaro Now: Mods for the Masses Part I | Part II 13.15@106 1.95 | 100% Stock 12.37@112 1.85 | + Kooks Headers/Cats + 20" 555R + CAI + BW TB + UDP + Tune 12.06@113 1.70 | + CD 3200 + 18" NT05R + RCR Intake + NE OTR + GPI Tune 11.84@115 1.59 | + 3.91s + Race Star 17x7 Fronts 10.90@125 1.47 | + GPI VVT Cam + BW Ported Heads + CD 3800 |
01-17-2015, 01:41 PM | #5 |
Drives: none Join Date: Aug 2011
Location: DFW area
Posts: 1,844
|
That's insane. Thanks your persistence paid off Jeff! Congrats!
And well done Andy! Another instance of ADM throwing that little bit extra in! |
01-17-2015, 02:01 PM | #6 |
|
Nice job Jeff! Its been a while in the works!
|
01-17-2015, 02:06 PM | #7 |
Drives: 2013 SS Join Date: May 2013
Location: DFW
Posts: 4,102
|
Congrats again Jeff, now slap some heads and a cam!
__________________
|
01-17-2015, 03:04 PM | #8 |
|
Awesome job Jeff. Andy was talking about it the other day with me about you going down to try again. That will be a hard one to beat for sure.
|
01-17-2015, 03:24 PM | #9 |
Drives: 2010 IBM Camaro SS Join Date: Dec 2013
Location: GA
Posts: 263
|
Congrats man!!! Glad to see you reach your goal!!! Cam next? Or are you gonna try to put that #1 spot a lil further out of reach? I'm getting cammed next month but hopefully I can push PSJ outta the #10 spot before then
|
01-17-2015, 03:27 PM | #10 | |
Drives: 2011camaro SS Join Date: Nov 2012
Location: Allen, Tx
Posts: 2,202
|
This is a video of my 1st pass. The truck beside me that is so loud is a 9 sec truck!! But he red lights and I cut a .005 light.
http://youtu.be/SmwhR1ZNrI8 |
|
01-17-2015, 03:33 PM | #11 | ||
Drives: 2011camaro SS Join Date: Nov 2012
Location: Allen, Tx
Posts: 2,202
|
Quote:
Quote:
|
||
01-17-2015, 04:07 PM | #12 | |
Drives: 2010 IBM Camaro SS Join Date: Dec 2013
Location: GA
Posts: 263
|
Quote:
|
|
01-17-2015, 04:12 PM | #13 |
Drives: 2011camaro SS Join Date: Nov 2012
Location: Allen, Tx
Posts: 2,202
|
Yes stock driveshaft and stock suspension. Rhino modded intake.
|
01-17-2015, 05:06 PM | #14 |
Drives: 2010 IBM Camaro SS Join Date: Dec 2013
Location: GA
Posts: 263
|
Awesome! Just curious if your stock DS was still holding up? I guess its either hit or miss? That's a good 60ft for a stock suspension too. What was your race weight?
|
|
|
|
|