06-14-2014, 06:58 PM | #1 |
Drives: Camaros, Vettes, Trucks Join Date: Dec 2010
Location: Fort Lauderdale, FL
Posts: 941
|
Whipple-charged Camaro in for upgrades - Lashway Motorsports
This Camaro was purchased by a client of ours who lives out of state. First thing he wanted us to do was test the current tune and the health of the engine as it is equipped with a Whipple Supercharger and full bolt ons.
Preliminary dyno testing produced less then impressive numbers (less than 500 RWHP with quite a bit of boost). The tune also had some issues - mostly with timing and AFR, and driveability. In all, the tune that was written by another shop wasn't done well, and hurt the engine. We conducted leak down and compression tests and found that a few cylinders we're damaged. Most likely damaged ringlands or rings. We're in the process of removing the engine, and sending it out for rebuild. Once the shortblock is back, we will re-assemble the longblock and Whipple, and head back to the dyno for a proper tune, one that will support this powertrain for the life the vehicle. Stay tuned for updates as we progress! |
06-15-2014, 01:40 PM | #2 |
Drives: Blown G8 GT Join Date: Apr 2010
Location: Orlando, FL
Posts: 782
|
Very nice
|
07-21-2014, 06:29 PM | #3 |
Drives: Camaros, Vettes, Trucks Join Date: Dec 2010
Location: Fort Lauderdale, FL
Posts: 941
|
UPDATE
TEC Shortblock This motor is built specifically for high boost on pump 93 octane and methanol injection and is rated to approximately 800 RWHP. Engine Specs: Mahle 4.070" Pistons, 12cc Dish, (2618 Alloy) 9.5-1 CR (70cc Head) Callies Compstar H Beam Rods, 6.125" ARP Main Stud Kit ARP Head Stud Kit Clevite Main/Rod Bearing Kit OEM crankshaft, 58x OEM block, aluminum [IMG]http://i1372.photobucket.com/albums/ag349/********/IMG_1389_zps9356fbff.jpg[/IMG] [IMG]http://i1372.photobucket.com/albums/ag349/********/IMG_1390_zpsbbcfb901.jpg[/IMG] |
07-21-2014, 07:50 PM | #4 | |
Drives: '13 Roush S3 '16 Ram Sport 4X4 Join Date: Apr 2009
Location: Massachusetts
Posts: 3,100
|
Quote:
I am assuming there will be a lot of boost and a more aggressive tune now. lol What are the boost level goals? Running all on pump gas? |
|
07-22-2014, 09:47 AM | #5 | |
Drives: Camaros, Vettes, Trucks Join Date: Dec 2010
Location: Fort Lauderdale, FL
Posts: 941
|
Quote:
Otherwise, he would be limited at some point to race gas, or a mix of race and pump which on a street car is rough on the wallet. The down side to lowering compression is power loss when you aren't in boost. You can easily make up for it though, so the trade off is worth it. We're also running an aftermarket custom cam shaft from Tooley Racing which will get this thing moving out a lot more efficiently. Thanks for the interest in our build. |
|
07-29-2014, 05:36 PM | #6 |
Drives: Camaros, Vettes, Trucks Join Date: Dec 2010
Location: Fort Lauderdale, FL
Posts: 941
|
She is coming along good almost ready to go back in the car!!
[IMG]http://i1372.photobucket.com/albums/ag349/********/IMG_1536_zpsb0813da3.jpg[/IMG] |
07-31-2014, 08:15 PM | #7 |
Drives: 2010 CAMARO 2SS/RS Join Date: May 2010
Location: CAPE CORAL, FLORIDA
Posts: 77
|
Well erik this sucks! Another car damaged by a "Shop" not doing things correctly! It's a shame this kind of thing keeps happening! Sure you will get it fixed up like you fixed the G8 guys this past weekend!
|
|
|