02-23-2018, 10:59 AM | #1 |
Looking to buy new stock ZL1 1LE oem wheels
Is anyone selling their OEM 1LE wheels the 19x11 and 19x12”s
Please let me know. Domenic 813-918-3321 |
|
02-23-2018, 12:56 PM | #2 |
Drives: 18 Camaro ZL1 1LE (WILSON) Join Date: Jul 2009
Location: N.C.
Posts: 1,340
|
I bought the knock off ones by MRR, 716's I think.. They look the same but they are 19x10.5 and 19x11. I put the same size tires on them though. I now have the knock off set as my daily driver tires and the original OEM set as my track set.
__________________
|
02-23-2018, 12:59 PM | #3 |
So it held the 325’s on back. How did they fit and look.
|
|
02-23-2018, 01:10 PM | #4 |
Drives: 18 Camaro ZL1 1LE (WILSON) Join Date: Jul 2009
Location: N.C.
Posts: 1,340
|
I put Hankook Ventus V12 evo2 tires all the way around 305/325. They fit and look just fine.
__________________
|
02-23-2018, 03:57 PM | #5 |
Drives: 2017 White ZL1 A10 Join Date: Mar 2016
Location: SoCal
Posts: 171
|
Can you post some pics of your wheel set up ??
__________________
2018 Trackhawk
2017 ZL1 A10 2017 CTSV 2016 GT350 2015 Hellcat Challeger |
02-24-2018, 01:49 PM | #6 |
Drives: 18 Camaro ZL1 1LE (WILSON) Join Date: Jul 2009
Location: N.C.
Posts: 1,340
|
Here are few pictures
__________________
|
02-24-2018, 02:09 PM | #7 |
Drives: 2017 White ZL1 A10 Join Date: Mar 2016
Location: SoCal
Posts: 171
|
Thanks tnspd they look real close to oem except for the center caps. Would you say the concave looks close or do the oem have more concave look ?
__________________
2018 Trackhawk
2017 ZL1 A10 2017 CTSV 2016 GT350 2015 Hellcat Challeger |
02-24-2018, 05:13 PM | #8 |
The 325x 30x19 isn’t too stretched on that 11 inch wheel?
|
|
02-24-2018, 05:38 PM | #9 |
Are then
|
|
02-24-2018, 05:52 PM | #10 |
Drives: 18 Camaro ZL1 1LE (WILSON) Join Date: Jul 2009
Location: N.C.
Posts: 1,340
|
These rim are very close to OEM. The offset is almost the same. Except for the center cap and black lug nuts . They look very good. The tires fit just fine. If you look up those tires it says what width of a rim they will fit on.
__________________
|
02-24-2018, 06:18 PM | #11 |
Are they as concave as oem like this picture
|
|
02-24-2018, 06:19 PM | #12 |
Can you take a picture angle like that
|
|
02-24-2018, 11:12 PM | #13 |
Drives: 2017 White ZL1 A10 Join Date: Mar 2016
Location: SoCal
Posts: 171
|
Tampabucs4 if you don't mind me jumping on your post I'm looking for a set of ZL1 1LE wheels too so if anyone has part numbers for the wheels ? I found them on a site for $2600 for the set but can't find them anymore ? Not sure why. Thanks
__________________
2018 Trackhawk
2017 ZL1 A10 2017 CTSV 2016 GT350 2015 Hellcat Challeger |
02-26-2018, 02:12 PM | #14 |
Drives: 18 Camaro ZL1 1LE (WILSON) Join Date: Jul 2009
Location: N.C.
Posts: 1,340
|
I measured the concave on the rear wheels and knock off concave is 1/8th of an inch shallower than the OEM concave. I am pleased with the set up for a daily use rim and tire. It only cost $2600 dollars for the complete setup with TPMS, mounted, and shipped to my home. If you can find the OEM rims for sale somewhere I am sure they will more than likely cost more than $2600 dollars.
__________________
|
|
|
Post Reply
|
|
|