Fog Light Bezel Removal- How? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Cheetoh · 02-11-2016, 06:18 PM

How Do I remove the ZL1 Foglight Bezels? Can they be removed with the Lights installed?

Mike-ZL1 · 02-11-2016, 06:40 PM

Quote:

Originally Posted by Cheetoh

How Do I remove the ZL1 Foglight Bezels? Can they be removed with the Lights installed?

Yes lights stay installed in bumper. The bezels pop off with plastic tabs that hold them in place.

Cheetoh · 02-12-2016, 03:05 AM

Quote:

Originally Posted by Mike-ZL1

Yes lights stay installed in bumper. The bezels pop off with plastic tabs that hold them in place.

Can they be removed from the Outside then? Without going through the Wheel liner?

Mike-ZL1 · 02-12-2016, 05:37 AM

Quote:

Originally Posted by Cheetoh

Can they be removed from the Outside then? Without going through the Wheel liner?

Yes but you could damage the tabs or bumper trying it that way. I would go from the back. Good luck

BriteCrawler · 02-12-2016, 09:43 AM

I pulled mine not long ago. I didn't remove the wheel and well liner.

You can drop ~8 screws from the belly pan, reach up inside on a crawler or on your back and release the tabs. Took me less than 5 minutes to get them off.

winterboy8 · 02-15-2016, 05:41 AM

You only need to remove 3 screws to be able to peel back the wheel liner to get to them.

02-11-2016, 06:18 PM	#1
Cheetoh Drives: 2011 Callaway SC572, 2000 Firehawk Join Date: Nov 2009 Location: Irving, TX Posts: 465	Fog Light Bezel Removal- How? How Do I remove the ZL1 Foglight Bezels? Can they be removed with the Lights installed? __________________

02-15-2016, 05:41 AM	#6
winterboy8 Drives: 2015 ZL1 Blue Velvet Metallic Join Date: Mar 2015 Location: Melbourne, FL Posts: 720 View My Garage	You only need to remove 3 screws to be able to peel back the wheel liner to get to them. __________________ Roto-Fab CAI, ARH LT, SW 3" catback, JRE tune, Elite-2 CC, VMAX TB, Big Gulp, WW II relo, Lingenfelter S/C reservoir

02-12-2016, 09:43 AM	#5
BriteCrawler Drives: 2014 ZL1 Join Date: Aug 2011 Location: Atlanta Posts: 183 View My Garage	I pulled mine not long ago. I didn't remove the wheel and well liner. You can drop ~8 screws from the belly pan, reach up inside on a crawler or on your back and release the tabs. Took me less than 5 minutes to get them off.