NCM recovery plan

C7BOB · 02-13-2014, 10:13 PM

Here's the recovery plan email I just received:

Timeline Set for Sinkhole Repair and Car Recovery

During a press conference today on Corvette Boulevard, Mike Murphy with Scott, Murphy & Daniel construction provided an update and timeline on the work to be done.

Highlights of the press conference include:

- This is very common for this area, what's not common is for a sinkhole to swallow eight Corvettes.
- It is repairable. The building foundation and structure is in good condition.
- They will be securing the sinkhole and surrounding areas to ensure that even if we have sinkholes on the property in the future it will not affect the Museum.
- It will take 2-3 weeks to stabilize and secure the area (red spire, walls of the sinkhole) then the process of vehicle recovery will begin.
- They will be making sure the sinkhole is safe and that no further damage will occur before starting vehicle recovery.
- It will take 4-6 days to retrieve the vehicles
- After that, they will replace earth and the floor system
- They have a good plan and it takes action tomorrow with no problems foreseen

"We are confident that it will be done in time for the Museum's 20th Anniversary Celebration in August. You won't even know that this has happened," said Wendell Strode, Museum Executive Director

Chevrolet to Oversee Restoration of Historic Corvettes

To help the National Corvette Museum recover from the massive sink hole, Chevrolet will be overseeing restoration of the Corvettes damaged. The process will be managed by General Motors Design in Warren, Mich.

“The vehicles at the National Corvette Museum are some of the most significant in automotive history,” said Mark Reuss, executive vice president of General Motors Global Product Development. “There can only be one 1-millionth Corvette ever built. We want to ensure as many of the damaged cars are restored as possible so fans from around the world can enjoy them.”

The restoration will be overseen by Ed Welburn, vice president of GM Global Design.

When the cars are recovered, they will be shipped to the Mechanical Assembly facility, a small specialty shop within GM Design, where the best restoration approach will be determined. Mechanical Assembly has been part of GM Design since the 1930s, and today maintains and restores many of the vehicles in the GM Heritage Collection and GM’s historic concept cars.

Hulkamaniac · 02-14-2014, 08:09 AM

Glad they have a plan.

Hopefully it will be done in time to visit this summer.

Steven Bell · 02-14-2014, 03:17 PM

I want to know how they will extract the cars from the hole?

OldJedi · 02-14-2014, 08:33 PM

Quote:

Originally Posted by Steven Bell

I want to know how they will extract the cars from the hole?

They are going to use helium balloons and float them out!

Sorry, I could not resist.

1stcorvette · 02-15-2014, 02:54 PM

SHOW ME THE CARFAX

02-13-2014, 10:13 PM	#1
C7BOB Drives: 2012 C6 COUPE Join Date: Aug 2013 Location: Cupertino, CA Posts: 40	NCM recovery plan Here's the recovery plan email I just received: Timeline Set for Sinkhole Repair and Car Recovery During a press conference today on Corvette Boulevard, Mike Murphy with Scott, Murphy & Daniel construction provided an update and timeline on the work to be done. Highlights of the press conference include: - This is very common for this area, what's not common is for a sinkhole to swallow eight Corvettes. - It is repairable. The building foundation and structure is in good condition. - They will be securing the sinkhole and surrounding areas to ensure that even if we have sinkholes on the property in the future it will not affect the Museum. - It will take 2-3 weeks to stabilize and secure the area (red spire, walls of the sinkhole) then the process of vehicle recovery will begin. - They will be making sure the sinkhole is safe and that no further damage will occur before starting vehicle recovery. - It will take 4-6 days to retrieve the vehicles - After that, they will replace earth and the floor system - They have a good plan and it takes action tomorrow with no problems foreseen "We are confident that it will be done in time for the Museum's 20th Anniversary Celebration in August. You won't even know that this has happened," said Wendell Strode, Museum Executive Director Chevrolet to Oversee Restoration of Historic Corvettes To help the National Corvette Museum recover from the massive sink hole, Chevrolet will be overseeing restoration of the Corvettes damaged. The process will be managed by General Motors Design in Warren, Mich. “The vehicles at the National Corvette Museum are some of the most significant in automotive history,” said Mark Reuss, executive vice president of General Motors Global Product Development. “There can only be one 1-millionth Corvette ever built. We want to ensure as many of the damaged cars are restored as possible so fans from around the world can enjoy them.” The restoration will be overseen by Ed Welburn, vice president of GM Global Design. When the cars are recovered, they will be shipped to the Mechanical Assembly facility, a small specialty shop within GM Design, where the best restoration approach will be determined. Mechanical Assembly has been part of GM Design since the 1930s, and today maintains and restores many of the vehicles in the GM Heritage Collection and GM’s historic concept cars. __________________ * 2012 SuperSonic Blue coupe, gray int., A6, 3LT, NCM Delivery 04/16/2012 * 2005 LeMans Blue coupe, black int., A4, 1SB, NCM Delivery 4/25/2005 2003 gray/black coupe, A4, F55, 12CD, NCM Delivery 9/16/2002 2000 green/tan coupe, A4, NCM Delivery 5/16/2000 1996 CE silver/gray coupe, A4 1993 green/tan coupe, A4 Last edited by C7BOB; 02-13-2014 at 10:28 PM. Reason: error in title

02-14-2014, 08:09 AM	#2
Hulkamaniac Livin' the Dream Drives: '23 Charger GT, '23 Stingray Join Date: Mar 2013 Location: Hiding in your closet... Posts: 785 View My Garage	Glad they have a plan. Hopefully it will be done in time to visit this summer. __________________ If you spell Chuck Norris in Scrabble, you win. Forever.

02-15-2014, 02:54 PM	#5
1stcorvette Drives: None at present Join Date: Nov 2013 Location: Myrtle Beach, SC Posts: 90	SHOW ME THE CARFAX __________________

02-14-2014, 03:17 PM	#3
Steven Bell Drives: 2014 Chevrolet Corvette Stingray Join Date: Oct 2013 Location: Kansas City, MO Posts: 162	I want to know how they will extract the cars from the hole?