QTP cutout problem, QTP said they can’t help me! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

OHIOSS · 11-02-2020, 01:48 PM

I am getting this on my QTP controller display: ER6

I sent this to QTP and they told me my controller is obsolete and they have no information on how to program it. Really pisses me off because the cutouts are only about 6 years old so how can’t they tell me what is wrong and how to fix it??

I can’t find any instructions online either or anything that tells me what ER6 means. Can anyone help me? Last time I deal with QTP, they are offering ZERO support of their product!!

When I start the car I get ER6, push and hold both buttons on the switch. The display shows C and 1 is flashing and when I push the right button it changes to C 2 and the 2 is flashing. If I push the left button the display goes to CAL but nothing happens. What is the procedure to calibrate the cutouts? What does ER6 mean?

BLU DUCE · 11-02-2020, 02:48 PM

I have QTP cutouts, but I don't have a controller display.

SlingShot · 11-02-2020, 03:17 PM

Quote:

Originally Posted by BLU DUCE

I have QTP cutouts, but I don't have a controller display.

Same here, mine just has the manual toggle switch.

OHIOSS · 11-02-2020, 03:53 PM

The cutouts are probably 6 years old but QTP said they were obsolete 10+ years ago. Nobody there can tell me any information on how to troubleshoot the problem. The cutouts worked fine until I disconnected the battery so I'm almost positive there is nothing wrong with them.

It looks like my only options is to pay more money to upgrade to the wireless controller. Nobody have been at QTP long enough to tell me how to troubleshoot this, this is total BS if you ask me!

This is the controller display.

Silver14 · 11-02-2020, 04:05 PM

Where did you purchase the cutouts, maybe they can offer support?

BLU DUCE · 11-02-2020, 05:32 PM

Quote:

Originally Posted by Silver14

Where did you purchase the cutouts, maybe they can offer support?

Read the number 1 post he put up.

Camaro2ss2010 · 11-02-2020, 05:35 PM

Maybe this will help you trouble shoot it. You may or may not have this already.

Silver14 · 11-02-2020, 05:44 PM

Quote:

Originally Posted by BLU DUCE

Read the number 1 post he put up.

I did, sorry if I'm missing where OP purchased them, all I'm seeing is that they are QTP cutouts. If you see the vendor that sold them listed, seems like it would be easier to just answer

Quote:

Originally Posted by Camaro2ss2010

Maybe this will help you trouble shoot it. You may or may not have this already.

Nice job finding that!

BLU DUCE · 11-02-2020, 05:57 PM

Quote:

Originally Posted by Silver14

I did, sorry if I'm missing where OP purchased them, all I'm seeing is that they are QTP cutouts. If you see the vendor that sold them listed, seems like it would be easier to just answer

Nice job finding that!

I'm glad I didn't buy that set up. I just hope he gets it worked out.

OHIOSS · 11-02-2020, 10:32 PM

Quote:

Originally Posted by Camaro2ss2010

Maybe this will help you trouble shoot it. You may or may not have this already.

Fantastic, just what I was looking for!!

Thank you!!

camguynj · 11-02-2020, 11:29 PM

Quote:

Originally Posted by OHIOSS

Fantastic, just what I was looking for!!

Thank you!!

If you still have questions call QTP and ask to speak with Andy. He's been there since day 1

Camaro2ss2010 · 11-03-2020, 06:45 AM

Quote:

Originally Posted by OHIOSS

Fantastic, just what I was looking for!!

Thank you!!

Np. That’s what this forum is good. Hope you get it worked out.

11-02-2020, 01:48 PM	#1
OHIOSS Russ Drives: Yukon Denali, Charger, CamaroSS Join Date: Jun 2009 Location: Ohio Posts: 2,811	QTP cutout problem, QTP said they can’t help me! I am getting this on my QTP controller display: ER6 I sent this to QTP and they told me my controller is obsolete and they have no information on how to program it. Really pisses me off because the cutouts are only about 6 years old so how can’t they tell me what is wrong and how to fix it?? I can’t find any instructions online either or anything that tells me what ER6 means. Can anyone help me? Last time I deal with QTP, they are offering ZERO support of their product!! When I start the car I get ER6, push and hold both buttons on the switch. The display shows C and 1 is flashing and when I push the right button it changes to C 2 and the 2 is flashing. If I push the left button the display goes to CAL but nothing happens. What is the procedure to calibrate the cutouts? What does ER6 mean?

11-02-2020, 02:48 PM	#2
BLU DUCE Drives: 2011 1SS/RS IBM Camaro Join Date: Jan 2011 Location: Chittenango, NY, USA Posts: 7,219 View My Garage	I have QTP cutouts, but I don't have a controller display. __________________

11-02-2020, 03:53 PM	#4
OHIOSS Russ Drives: Yukon Denali, Charger, CamaroSS Join Date: Jun 2009 Location: Ohio Posts: 2,811	The cutouts are probably 6 years old but QTP said they were obsolete 10+ years ago. Nobody there can tell me any information on how to troubleshoot the problem. The cutouts worked fine until I disconnected the battery so I'm almost positive there is nothing wrong with them. It looks like my only options is to pay more money to upgrade to the wireless controller. Nobody have been at QTP long enough to tell me how to troubleshoot this, this is total BS if you ask me! This is the controller display. Attached Images

11-02-2020, 05:35 PM	#7
Camaro2ss2010 Drives: 2010 Camaro 2SSRS M6 Join Date: Jan 2019 Location: Alabama Posts: 1,249	Maybe this will help you trouble shoot it. You may or may not have this already. Attached Images __________________ ECS supercharger, custom ground cam, ported throttle body, long tube headers, aeromotive fuel pump, fic injectors, ATI super damper, Corsa Extreme exhaust, elite engineering catch can and many other things.

11-02-2020, 04:05 PM	#5
Silver14 Drives: 2014 SIM 2SS Join Date: Sep 2015 Location: Charlotte, NC Posts: 925	Where did you purchase the cutouts, maybe they can offer support?