**NEW** C7 Hurst Short throw shifter!!!

Andrew6 · 10-07-2013, 11:46 PM

We've (TheDoubleAA.com) been working on this for a while and finally got time to finish it up today. We designed a Hurst style shifter with short throw and also have different options for the new shifter as well!

In my opinion it shifts amazingly now. I've not stalled it since I installed it and seems to shift a heck of alot smoother.

Let me know what ya'll think!

Mr24G · 10-08-2013, 06:49 AM

Shoot. I'll take one right now.

Andrew6 · 10-08-2013, 11:52 AM

we make a camaro one too. which would you need?

showstopper · 10-08-2013, 02:52 PM

Looks good. Very similar to the C6?

Andrew6 · 10-08-2013, 03:31 PM

Quote:

Originally Posted by showstopper

Looks good. Very similar to the C6?

fairly similar with a few other modifications. I worked with a guy that has a phd in fluid mechanics to get this right. It works great and even my wife commented on how much easier it was for her to shift it.

jb306y · 11-16-2013, 09:55 AM

How hard is it to remove and replace the console? Any "how to" links?

Thanks,

Andrew6 · 11-18-2013, 11:23 PM

not overly difficult and we do have a how to as well.

Nonstop · 11-19-2013, 10:55 AM

I'd like to see, or get the link to, the how to as well especially on removing the trim pieces and center console, if it's ok.

Andrew6 · 11-23-2013, 08:31 PM

email me and I'll see if I can get you the pfd. On a side note the center section is push pin style in and can pop right out. To remove the shifter you'll need to turn the ring counter clock wise and pull down to reveal the screw holding it in place.

C7Driver · 01-28-2014, 11:51 PM

That's pretty much how it works on a C6. I replaced my stock manual shifter with a short-throw shifter (different vendor) and the improvement was very nice.

Andrew6 · 01-30-2014, 04:57 AM

I sold my coupe and bought a convertible and the very first mod I'll be doing on the convertible is adding the short throw shifter. Even my wife loved it which is saying something!

New C7 · 02-01-2014, 07:27 PM

I had a MGW in my C6. Liked I a lot but I don't feel it necessary to change out the C7. Yet.

Andrew6 · 02-01-2014, 10:07 PM

If you live near Houston you can compare the shift points from mine to the stock and it's a night and day difference.

Corvette7Tuning · 03-05-2014, 09:38 PM

Great job on the shifter. Can't go wrong with the old school white shift knob

10-07-2013, 11:46 PM	#1
Andrew6 TheDoubleAA.com Drives: 2008 Corvette Coupe ZHZ 269of500 Join Date: Aug 2011 Location: League City Texas Posts: 185	NEW C7 Hurst Short throw shifter!!! We've (TheDoubleAA.com) been working on this for a while and finally got time to finish it up today. We designed a Hurst style shifter with short throw and also have different options for the new shifter as well! In my opinion it shifts amazingly now. I've not stalled it since I installed it and seems to shift a heck of alot smoother. Let me know what ya'll think!

03-05-2014, 09:38 PM	#14
Corvette7Tuning Drives: 2014 corvette stingray Join Date: Sep 2013 Location: New York Posts: 178	Great job on the shifter. Can't go wrong with the old school white shift knob __________________ 2014 Corvette Stingray Parts & Accessories Lowest Prices & Free Shipping! www.Corvette7Tuning.com

10-08-2013, 06:49 AM	#2
Mr24G Drives: 2013 Camaro 2SS/RS Convertible. Join Date: Nov 2011 Location: Chicago Illinois Posts: 216	Shoot. I'll take one right now.

10-08-2013, 11:52 AM	#3
Andrew6 TheDoubleAA.com Drives: 2008 Corvette Coupe ZHZ 269of500 Join Date: Aug 2011 Location: League City Texas Posts: 185	we make a camaro one too. which would you need?

10-08-2013, 02:52 PM	#4
showstopper Drives: 2010 RS/SS Join Date: Jul 2009 Location: USA Posts: 3,442	Looks good. Very similar to the C6?

11-16-2013, 09:55 AM	#6
jb306y Drives: 2014 Corvette Join Date: Oct 2013 Location: Ohio Posts: 40	How hard is it to remove and replace the console? Any "how to" links? Thanks,

11-18-2013, 11:23 PM	#7
Andrew6 TheDoubleAA.com Drives: 2008 Corvette Coupe ZHZ 269of500 Join Date: Aug 2011 Location: League City Texas Posts: 185	not overly difficult and we do have a how to as well.

11-19-2013, 10:55 AM	#8
Nonstop Drives: Stingray Join Date: Oct 2013 Location: South Florida Posts: 10	I'd like to see, or get the link to, the how to as well especially on removing the trim pieces and center console, if it's ok.

11-23-2013, 08:31 PM	#9
Andrew6 TheDoubleAA.com Drives: 2008 Corvette Coupe ZHZ 269of500 Join Date: Aug 2011 Location: League City Texas Posts: 185	email me and I'll see if I can get you the pfd. On a side note the center section is push pin style in and can pop right out. To remove the shifter you'll need to turn the ring counter clock wise and pull down to reveal the screw holding it in place.

01-28-2014, 11:51 PM	#10
C7Driver Drives: 2014 Z51 Lime Rock Green Join Date: Jan 2014 Location: New England Posts: 148	That's pretty much how it works on a C6. I replaced my stock manual shifter with a short-throw shifter (different vendor) and the improvement was very nice.

01-30-2014, 04:57 AM	#11
Andrew6 TheDoubleAA.com Drives: 2008 Corvette Coupe ZHZ 269of500 Join Date: Aug 2011 Location: League City Texas Posts: 185	I sold my coupe and bought a convertible and the very first mod I'll be doing on the convertible is adding the short throw shifter. Even my wife loved it which is saying something!

02-01-2014, 07:27 PM	#12
New C7 Drives: 2014 Corvette Coupe Join Date: Mar 2013 Location: United States Posts: 67	I had a MGW in my C6. Liked I a lot but I don't feel it necessary to change out the C7. Yet.

02-01-2014, 10:07 PM	#13
Andrew6 TheDoubleAA.com Drives: 2008 Corvette Coupe ZHZ 269of500 Join Date: Aug 2011 Location: League City Texas Posts: 185	If you live near Houston you can compare the shift points from mine to the stock and it's a night and day difference.