Anyone have a shifter handy? M6 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Vroom_vroom · 06-27-2016, 03:35 PM

Wanted to see if someone had a stock shifter handy they could tell me the diameter of the stock shaft?

Sent from my iPhone using Tapatalk

olblue75 · 06-27-2016, 06:27 PM

I have a factory hurst short throw but dont have a caliper/micrometer to measure it.

paul84043 · 06-27-2016, 07:42 PM

The upper section is .570, the section below the larger weighted section is .470.

06-27-2016, 03:35 PM	#1
Vroom_vroom The gritos pollo!!! Drives: Like a idiot Join Date: Jul 2012 Location: Las Vegas Posts: 1,215 View My Garage	Anyone have a shifter handy? M6 Wanted to see if someone had a stock shifter handy they could tell me the diameter of the stock shaft? Sent from my iPhone using Tapatalk __________________ ______ If you don't stop how can they give you a ticket?-The Big Tuna___ '12 1Ls Camaro; Slp loud mouth I\|maganflow x-pipe\|Injen long ram intake\|brembo brake upgrade\| russell s.s. lines\|2LT polished 19's\|billet 5mm spacers\|tinted tail lights&markers\|pdmi\|billet c. can\| '13 Avenger R/T '77 T/A 6.6;, draining my wallet.

06-27-2016, 06:27 PM	#2
olblue75 Drives: 2010 2SS/RS Join Date: Dec 2009 Location: Clarksville Tennesse. Posts: 6,064	I have a factory hurst short throw but dont have a caliper/micrometer to measure it. __________________ Orange Krush II 1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components.

06-27-2016, 07:42 PM	#3
paul84043 Drives: 2015 Camaro 2SS RS 1LE Join Date: Nov 2011 Location: Lehi, Utah Posts: 1,349 View My Garage	The upper section is .570, the section below the larger weighted section is .470. Attached Images