New personal best m6 stock with drag radials - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

dtwolcot2 · 12-22-2014, 11:39 AM

Raced at Darlington dragway with great conditions and the track was awesome. Car is a stock m6 with Mickey drag radials. Friendly staff that made sure the track stayed well prepped. Hoping to get lower 60' times to take me to 11.6. What is the fastest stock manual with drag radials? I looked at the fast list but didn't see any into the 11's. I know there have to be a bunch out there.

jon6.0 · 12-22-2014, 11:40 AM

Awesome!

RenoSyn · 12-22-2014, 11:42 AM

Excellent times!

hognutz · 12-22-2014, 12:04 PM

This is the fastest (stock m6) I have seen posted on this site but not everbody post here obvioulsy.

hotlap · 12-22-2014, 12:34 PM

lbls1 · 12-22-2014, 12:49 PM

Great times!

Stephen12ZL1 · 12-22-2014, 01:08 PM

You win the prize for a stock M6. It seems no one can row the gears in these cars stock. Also, no one can launch them either. With that combination, it is no wonder we haven't seen any spectacular M6 times.

dtwolcot2 · 12-22-2014, 01:12 PM

I wasnt worried about reaction times since they only prepped one lane and just focused on getting a good launch. My first 2 runs were 12.1 and 12.3. Run with all nannies off. I like to remove the 2 abs fuses so I don't have anything to fiddle with during burnout and at the launch. The best I have done before is a 12.07 and i usually would either bog or blow the tires off. I had to slip the clutch a lot more than I would have thought. It held up good but started to smell. I let the car and the clutch cool for about an hour between runs. With these runs I am very happy with the car. I hope to get a couple more days at the track before I start modding.

dtwolcot2 · 12-22-2014, 01:24 PM

Thanks guys! I didn't think that these would have been one of the fastest times.

dtwolcot2 · 12-22-2014, 01:31 PM

Quote:

Originally Posted by Stephen12ZL1

You win the prize for a stock M6. It seems no one can row the gears in these cars stock. Also, no one can launch them either. With that combination, it is no wonder we haven't seen any spectacular M6 times.

I don't think rowing the gears is hard and I like the no lift shift. I think it's all in the launch. You have to keep the rpms up or you will drop rpms after you get out of the hole. I have gotten 1.7 60' times before but I released the clutch fully too early and would cause me to lose rpm and I think that was why I couldn't get into the 11's before. I think the rpms staying up made my trap speeds at the 1/8th and 1/4 a lot faster. I usually struggle to get into the 90's in the 1/8th but one of my runs was at 95.

2Z's4me · 12-22-2014, 02:09 PM

Excellent times!! You are a great driver to get those times with a manual.

JANNETTYRACING · 12-22-2014, 04:01 PM

Quote:

Originally Posted by dtwolcot2

Raced at Darlington dragway with great conditions and the track was awesome. Car is a stock m6 with Mickey drag radials. Friendly staff that made sure the track stayed well prepped. Hoping to get lower 60' times to take me to 11.6. What is the fastest stock manual with drag radials? I looked at the fast list but didn't see any into the 11's. I know there have to be a bunch out there.

Congrats that some driving, Great Job.

Happy Holidays.

Ted.

LuckyZL-1 · 12-22-2014, 09:31 PM

Nice driving!

Bigtime53 · 12-22-2014, 10:28 PM

Dammmmmmn!!!

That is flat doing some driving! Congrats on those times. I believe that is the fastest stock times I have seen.

12-22-2014, 11:39 AM	#1
dtwolcot2 Drives: 2012 Camaro ZL1 Join Date: Jun 2014 Location: GA Posts: 167	New personal best m6 stock with drag radials Raced at Darlington dragway with great conditions and the track was awesome. Car is a stock m6 with Mickey drag radials. Friendly staff that made sure the track stayed well prepped. Hoping to get lower 60' times to take me to 11.6. What is the fastest stock manual with drag radials? I looked at the fast list but didn't see any into the 11's. I know there have to be a bunch out there. Attached Images

12-22-2014, 11:40 AM	#2
jon6.0 Going for Plaid Drives: 2011 C6 Join Date: Jan 2010 Location: Phoenix Posts: 885	Awesome! __________________ 2014 ZL1, manual trans, carbon hood insert, Rotofab, Pacesetter 1 7/8" headers, 1" drop BMR springs, stock pulleys, 91 octane tune, 545rwhp & 515rwtq Serviced and modded by Cordes Performance. 2011 C6, 750rwhp, forged LS3, ported LSA heads, Vortech Ti-trim, 227/243 115+4 Lunati cam, ported LS3 intake, Alky Control methanol, Pfadt sways/shocks/trans mounts, Pfadt tri-y headers(Sold 6/28/14)

12-22-2014, 12:04 PM	#4
hognutz Drives: 2013 ZL1 Join Date: Oct 2011 Location: tangent or Posts: 2,984	This is the fastest (stock m6) I have seen posted on this site but not everbody post here obvioulsy. __________________ shopping for 2017+1le or zl1 2009 CTS-V -sold 2015 Hellcat-sold 2013 ZL1 -sold 2007 Z06- sold 2014 Chrysler 300 2011 Duramax 8" lift, deleted tuned

12-22-2014, 12:34 PM	#5
hotlap Drives: 20 1LE 2SS M6 Rally Green Join Date: Mar 2014 Location: Franklin WI Posts: 6,632	__________________ "the trouble with our liberal friends is not that they're ignorant; it's just that they know so much that isn't so.” Ronald Reagan -

12-22-2014, 12:49 PM	#6
lbls1 Drives: 2002 Camaro SS SOM; 2015 Malibu LTZ Join Date: Dec 2010 Location: Queens, NY Posts: 4,022	Great times! __________________ '02 CAMARO SS SOM; 5.7L LS1/FLS6B '08 TBSS AWD Black Granite Metallic '15 Malibu LTZ 2LZ Turbo *'14 CAMARO ZL1 Blue Ray Metallic*

12-22-2014, 11:42 AM	#3
RenoSyn Drives: Feet Join Date: Dec 2014 Location: Earth Posts: 16	Excellent times!

12-22-2014, 01:08 PM	#7
Stephen12ZL1 Drives: '21 ZLE A10 Join Date: May 2012 Location: Mechanicsville, VA Posts: 6,808	You win the prize for a stock M6. It seems no one can row the gears in these cars stock. Also, no one can launch them either. With that combination, it is no wonder we haven't seen any spectacular M6 times. __________________ '21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60' '17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold)

12-22-2014, 01:12 PM	#8
dtwolcot2 Drives: 2012 Camaro ZL1 Join Date: Jun 2014 Location: GA Posts: 167	I wasnt worried about reaction times since they only prepped one lane and just focused on getting a good launch. My first 2 runs were 12.1 and 12.3. Run with all nannies off. I like to remove the 2 abs fuses so I don't have anything to fiddle with during burnout and at the launch. The best I have done before is a 12.07 and i usually would either bog or blow the tires off. I had to slip the clutch a lot more than I would have thought. It held up good but started to smell. I let the car and the clutch cool for about an hour between runs. With these runs I am very happy with the car. I hope to get a couple more days at the track before I start modding.

12-22-2014, 01:24 PM	#9
dtwolcot2 Drives: 2012 Camaro ZL1 Join Date: Jun 2014 Location: GA Posts: 167	Thanks guys! I didn't think that these would have been one of the fastest times.

12-22-2014, 02:09 PM	#11
2Z's4me Drives: 2013 Camaro ZL1, 2006 Corvette Z06 Join Date: Jan 2012 Location: San Marcos, California Posts: 193	Excellent times!! You are a great driver to get those times with a manual.

12-22-2014, 09:31 PM	#13
LuckyZL-1 Ragtop Rocket!!! Drives: Black on Black Convertible Join Date: Mar 2013 Location: San Antonio Texas Posts: 809	Nice driving! __________________ ADM built 2013 Triple Black ZL-1 Convertible M6 ADM custom cam, LPE stage 2 heads with dual valve springs, LS-3 ported throttle body, LPE 2 piece pulley, LPE overdrive balancer, 10% overdrive pulley, ported supercharger inlet, ADM race intake system, stainless works 1-7/8 headers, Injector Dynamics injectors, ADM heat exchanger, ADM dual fuel pump system, ADM exhaust switch, ADM 3 tunes tuning package. 744rwhp 727rwtq

12-22-2014, 10:28 PM	#14
Bigtime53 Drives: 2013 ZL1 Join Date: Mar 2013 Location: Oklahoma Posts: 2,298	Dammmmmmn!!! That is flat doing some driving! Congrats on those times. I believe that is the fastest stock times I have seen.