11-11-2013, 09:18 AM | #1 | ||
|
Vid: Cammed w/cutouts 1-3 gears
Here is a taste of an uncorked & cammed LS3 from a rolling start up through third gear. Traction was an issue!
Same thing but with cutouts closed and a poor choice for a launch - road conditions were poor. Really was a slip and slide for traction on this run. I want to thank my co-pilot and fellow forum member Swizlstik for the use of his Go-pro and his camera operating skills.
__________________
2016 Camaro 1SS Hyper Blue 6MT NPP
2010 Camaro 2SS Cam/Headers/CAI/3.91 gears 476 rwhp/440 rwtq (sold) |
||
11-11-2013, 09:48 AM | #2 |
Drives: 2010 Cyber Grey Camaro SS (LS3) Join Date: Mar 2010
Location: Clarksville TN
Posts: 2,275
|
Nice!! What kind of power are you putting down?? How do you like your 3.91's?
__________________
GPI SS3 Cam / PRC 255 heads / Forged 376ci bottom / Fore level 2 fuel system / D1SC ProCharger on 12lbs / Alky control dual nozzle / 770 whp / 649 wtq tuned by Ryan Stevens at GPI
|
11-11-2013, 10:00 AM | #3 |
|
I'm at 461 rwhp and 440 rwtq. The 3.91's really complement the cam and calmed down what little low rpm surging and bucking I had. The engine pulls to red line MUCH quicker in first and second gear. These vids really didn't show that all that well as I was pedaling first gear to stay off the rev limiter so I could have some fun smoking the tires.
__________________
2016 Camaro 1SS Hyper Blue 6MT NPP
2010 Camaro 2SS Cam/Headers/CAI/3.91 gears 476 rwhp/440 rwtq (sold) |
11-11-2013, 11:26 AM | #4 |
|
This was a lot of fun! Your car sounds awesome Dan!!
__________________
|
11-11-2013, 01:08 PM | #5 |
Anabolic Connoisseur
Drives: Sold - Blown Camaro 2SS/RS LS3 Join Date: Sep 2010
Location: Oklahoma
Posts: 22,094
|
sounds awesome!
__________________
|
11-11-2013, 04:14 PM | #6 |
|
sounds good man!! what VR cam did you go with?
__________________
1 7/8" TSP headers straight piped, Custom Tick Performance cam w/ supporting mods, 1" BMR springs and other BMR suspension mods. Tuned with HPtuners by Matt@FSP
|
11-11-2013, 04:44 PM | #7 |
V8 Lounge member #2
Drives: 2001 Ws6 Join Date: Sep 2009
Location: Burbank,IL
Posts: 6,373
|
I'll pick the first video any time lol
__________________
2001 ws6, 40k miles, Ls3 416 stroker, short block built by PER the rest by me. LPE Ls3 heads milled to 12-1 comp, FAST 102, NW 102, kooks 2", dual DMH cutouts, Magnaflow C/B, BTR cam + springs. Full UMI suspension.
|
11-11-2013, 04:45 PM | #8 |
|
Its the Stage 2 cam. Its been thumping in there since Feb. 2012 and has delivered about 14000 miles of permagrin!
__________________
2016 Camaro 1SS Hyper Blue 6MT NPP
2010 Camaro 2SS Cam/Headers/CAI/3.91 gears 476 rwhp/440 rwtq (sold) |
11-11-2013, 04:50 PM | #9 |
|
I love it, the first video really kicks azz with the loudness from the open cut outs, like I always say, Louder the Better
__________________
Jannetty Racing JRE Street Package
|
11-12-2013, 02:24 PM | #10 |
|
Yep, I agree with them, the first video absolutely rocks! Love the sound!
|
|
|
|
|