2014 Camaro Rear Bumper Conversion - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

FrankieBee · 07-18-2014, 09:35 AM

Quote:

Originally Posted by chevy24@Gen5diy

Here is a list of the part numbers need to install the new 2014 rear bumper on prior year camaro's. The prices listed are GM list prices. I don't have a hardware list yet, so that will be a rough quote for now, until we actually do a conversion and now what is all needed... Also GM for some very strange reason has put core charges on the rear bumper and diffuser. Unfortunately turning in your old bumper and diffuser wont give you the core charge money back, since it is not the exact part.

List:
Upper Bracket:22833655 $17.37

Fascia w/park assist sensor holes:23164145 $495 + $75 core
Fascia w/o park assist sensor holes:23164146 $498 + $75 core

Absorber:22829531 $122.53

Brackets: L&R 22829479,22829480 $13.82 each

Diffuser w/single tip:22829476 $126.07 + $75 core
Diffuser w/dual tip(1LE style):22829477 $139.60 + $75 core

Outer brackets L&R:22915167,22915168 $14.57 each

Outer brackets L&R:23186324,23186325 $34.60 each

Lower brackets:23104631 x 2 $8.65 each

Mounting screws,retainers and rivets:$100

Also new taillights will be required for the install.

Don't forget the trunk lid- #22903525 don't hve the part number for rear spoiler. I purchased a "GM Blade" spoiler (looks like a Z28 spoiler) from Ebay.

Stop light lamp in trunk- #23172447
You can pick up a set of used halogen taillights on Ebay.
The LED taillights are harder to find on Ebay.

Angrybird 12 · 07-18-2014, 11:07 AM

Quote:

Originally Posted by FrankieBee

I transformed my 2010 Bumblebee into a 2014 a few months ago.

I also converted the front and modified the 2014 Non-RS lights and SS fascia.

Ofer from Gen5DIY helped with the rear harness.

That looks awesome! So can you give us a rough estimate of the cost?

FrankieBee · 07-18-2014, 10:36 PM

Quote:

Originally Posted by Angrybird 12

That looks awesome! So can you give us a rough estimate of the cost?

$1500 for rear conversion if you use GM List prices and that's not counting the LED taillights which cost me about $300 for both and the rear Blade spoiler ($425) from Ebay.

alssiri · 08-15-2014, 06:46 AM

Any updates on this ? Will love to do this soon .

Ahmad

turbofreek · 09-30-2014, 04:56 PM

Scribing

hexxJessCamaroSS · 10-03-2014, 09:01 PM

I'll be updating mine in 3 weeks. Mines the silver one 2012 2SS

pcguy2u · 10-09-2014, 03:20 PM

Does anyone know if there is a difference in the removal procedure for the rear bumper cover/valance on the 2014. Kind of stuck at the point of not wanting to pull too hard. The sides are loose and came off just like the 2010+ did/does, but the back doesn't want to unhook.

Heeeelllpppp....

TIA,
Nick

2SSRS@Gen5diy · 10-09-2014, 06:24 PM

Quote:

Originally Posted by alssiri

Any updates on this ? Will love to do this soon .

Ahmad

Have all the parts and working on adding to the site soon.

Quote:

Originally Posted by pcguy2u

Does anyone know if there is a difference in the removal procedure for the rear bumper cover/valance on the 2014. Kind of stuck at the point of not wanting to pull too hard. The sides are loose and came off just like the 2010+ did/does, but the back doesn't want to unhook.

Heeeelllpppp....

TIA,
Nick

Hi Nick, now that my new 2014 RS non RS tails are done i will pull the bumper off in the AM and let you know if its any different.

Angrybird 12 · 10-09-2014, 07:08 PM

Quote:

Originally Posted by 2SSRS@Gen5diy

Hi Nick, now that my new 2014 RS non RS tails are done i will pull the bumper off in the AM and let you know if its any different.

Now that is great customer service!!!!!

layzurguy · 10-09-2014, 07:13 PM

love the headlights FrankieBee

2SSRS@Gen5diy · 10-09-2014, 08:12 PM

So here are the new tail lights that are going on the white car.

This is the back up light.

This is the running light.

stop lights.

And last is the side markers and the tail light.

alssiri · 10-14-2014, 04:56 AM

Ahmad

hexxJessCamaroSS · 10-20-2014, 11:48 PM

Hey everybody
I purchased a 2014 rear end with the LED tail lights and truck lid with bumper. The rear end if my 2012 SS was just removed, now issues im facing is that pkug ins dont mstch for the lights. Bumper match up perfect and so did the trunk lid and new leds. The blug ins for tail lights dont mach, looking for a way to connect them. Then im all set!

alssiri · 10-21-2014, 02:28 AM

Quote:

Originally Posted by hexxJessCamaroSS

Hey everybody
I purchased a 2014 rear end with the LED tail lights and truck lid with bumper. The rear end if my 2012 SS was just removed, now issues im facing is that pkug ins dont mstch for the lights. Bumper match up perfect and so did the trunk lid and new leds. The blug ins for tail lights dont mach, looking for a way to connect them. Then im all set!

Wow, do you have a complete part list for the parts ? Pics.

Ahmad

08-15-2014, 06:46 AM	#32
alssiri Drives: 2017 ZL1 A10 Join Date: Aug 2009 Location: Dubai Posts: 1,250	Any updates on this ? Will love to do this soon . Ahmad __________________ 2017 ZL1 A10 SW (SOLD) Whipple 2.9 with 3.2 Pulley, Weapon-X Stage 3 Cam, FIICHILLER ,LG Motorsports LT, Borla S type, ROTFAB Big Gulp, Big 3 Reservoir Glassskinz rear window valance . 2012 ZL1 A6 (SOLD) Forged 376 CI, LSA HeartBeat, Mast Medium Bore Heads & JDP ZLR Cam, ARH LT , MagnaFlow Resonated X + Borla Atak Catback, ADM 102mm Snout, CAI, NW102MM TB, ID850, Fore Triple Fuel Pump, MSD Wire's, Moroso CC. Alky Control, FIICHILLER.

10-09-2014, 07:13 PM	#38
layzurguy Ride On!!!! Drives: 2012 SS Ragtop Join Date: May 2012 Location: Race City USA Posts: 605 View My Garage	love the headlights FrankieBee __________________

10-14-2014, 04:56 AM	#40
alssiri Drives: 2017 ZL1 A10 Join Date: Aug 2009 Location: Dubai Posts: 1,250	Ahmad __________________ 2017 ZL1 A10 SW (SOLD) Whipple 2.9 with 3.2 Pulley, Weapon-X Stage 3 Cam, FIICHILLER ,LG Motorsports LT, Borla S type, ROTFAB Big Gulp, Big 3 Reservoir Glassskinz rear window valance . 2012 ZL1 A6 (SOLD) Forged 376 CI, LSA HeartBeat, Mast Medium Bore Heads & JDP ZLR Cam, ARH LT , MagnaFlow Resonated X + Borla Atak Catback, ADM 102mm Snout, CAI, NW102MM TB, ID850, Fore Triple Fuel Pump, MSD Wire's, Moroso CC. Alky Control, FIICHILLER.

09-30-2014, 04:56 PM	#33
turbofreek Drives: triple black 2ss Join Date: Sep 2014 Location: kansas city Posts: 66	Scribing

10-03-2014, 09:01 PM	#34
hexxJessCamaroSS 2016 Camaro 2SS Drives: 2016 Camaro 2SS Join Date: Jan 2014 Location: Texas Posts: 56	I'll be updating mine in 3 weeks. Mines the silver one 2012 2SS

10-09-2014, 03:20 PM	#35
pcguy2u Drives: 2009 Corvette ZR1 Join Date: Aug 2012 Location: On the coast North of SFBay Posts: 297	Does anyone know if there is a difference in the removal procedure for the rear bumper cover/valance on the 2014. Kind of stuck at the point of not wanting to pull too hard. The sides are loose and came off just like the 2010+ did/does, but the back doesn't want to unhook. Heeeelllpppp.... TIA, Nick

10-09-2014, 08:12 PM	#39
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	So here are the new tail lights that are going on the white car. This is the back up light. This is the running light. stop lights. And last is the side markers and the tail light.

10-20-2014, 11:48 PM	#41
hexxJessCamaroSS 2016 Camaro 2SS Drives: 2016 Camaro 2SS Join Date: Jan 2014 Location: Texas Posts: 56	Hey everybody I purchased a 2014 rear end with the LED tail lights and truck lid with bumper. The rear end if my 2012 SS was just removed, now issues im facing is that pkug ins dont mstch for the lights. Bumper match up perfect and so did the trunk lid and new leds. The blug ins for tail lights dont mach, looking for a way to connect them. Then im all set!