02-04-2014, 04:08 PM | #1 |
TheDoubleAA.com
Drives: 2008 Corvette Coupe ZHZ 269of500 Join Date: Aug 2011
Location: League City Texas
Posts: 185
|
***Custom*** Flat top/bottom steering wheel
We had a customer that wanted something a bit different and wanted a flat top and bottom steering wheel. It came out great in my opinion. What do y'all think?
http://thedoubleaa.com/cart/index.ph...roducts_id=235 |
02-04-2014, 05:37 PM | #2 |
Drives: 2009 CLK550 Join Date: May 2013
Location: Irvine, CA
Posts: 49
|
I like it!!!
|
02-04-2014, 05:51 PM | #3 |
Drives: C7 Z51, BENZ GLK 350, Titan Join Date: Aug 2013
Location: TX
Posts: 163
|
I love it!!! can it be done in grey or yellow instead of red?
__________________
8/20/2013 - 1100 1/16/2014 - 2000 1/20/2014 - 3000 1/24/2014 - 3300 2/10/2014 - 3400 2/14/2014 - 3800 2/26/2014 - Delivered!!! |
02-04-2014, 08:05 PM | #4 |
TheDoubleAA.com
Drives: 2008 Corvette Coupe ZHZ 269of500 Join Date: Aug 2011
Location: League City Texas
Posts: 185
|
|
02-04-2014, 09:49 PM | #5 |
Drives: 2014 Chevrolet Corvette Stingray Join Date: Oct 2013
Location: Kansas City, MO
Posts: 162
|
|
02-05-2014, 07:46 AM | #6 |
Drives: 2008 Vette Join Date: May 2013
Location: Cape Cod, MA
Posts: 34
|
That is a beautiful wheel.
If I want to get the core wheel credit. Will you ship a completed wheel and credit $300 on return of the original wheel? If so I am very interested. How long after order to receive the new wheel? Thanks TRC7 |
02-05-2014, 11:46 AM | #7 |
Drives: 2008 Vette Join Date: May 2013
Location: Cape Cod, MA
Posts: 34
|
Steven,
Nice wheel. How difficult was the de/install of the steering wheels. Did the new wheel come with detailed instructions? Thanks TRC7 |
02-05-2014, 04:00 PM | #8 |
TheDoubleAA.com
Drives: 2008 Corvette Coupe ZHZ 269of500 Join Date: Aug 2011
Location: League City Texas
Posts: 185
|
|
02-05-2014, 04:01 PM | #9 |
TheDoubleAA.com
Drives: 2008 Corvette Coupe ZHZ 269of500 Join Date: Aug 2011
Location: League City Texas
Posts: 185
|
Once you receive your new wheel and as soon as we get your old wheel you'll be credited the 300
|
02-05-2014, 04:02 PM | #10 |
TheDoubleAA.com
Drives: 2008 Corvette Coupe ZHZ 269of500 Join Date: Aug 2011
Location: League City Texas
Posts: 185
|
We rush the ones that send in their wheel but as for core's it could be upward of 8 weeks. Cores are in very short supply.
|
02-05-2014, 04:10 PM | #11 | |
TheDoubleAA.com
Drives: 2008 Corvette Coupe ZHZ 269of500 Join Date: Aug 2011
Location: League City Texas
Posts: 185
|
Quote:
First disconnect one side of the battery on the rear passenger area. verify that you have no power If you look on the bottom side of steering wheel around the 4 and 6 o clock position you'll see 2 small holes. Use a small flat head screw driver in those small holes to release the air bag. (spring loaded) Once those are released you can pull out the air bag and disconnect the harnesses on the back. NOTE: On the 2 air bag plugs you only need to pull out the locking pins around 1/4 inches once you have the air bag off and harnesses disconnected you'll need to take the screw out holding the steering wheel in place. I believe it's a T45 or T50 screw. (It's large and I think it's the larger one). Once you have the screw off the steering wheel should come off by tapping at the 12/6/3 and 9 o'clock position until the wheel comes loose. Once you get the wheel off use a piece of painters tape or whatever you have to hold the clock spring in place (that is the thing that the harness plugged into and rotates. Now that you have the wheel off you can remove all of the parts from your old wheel and put it on the new wheel. Once that is done you can put the wheel back on. NOTE: Make sure that the Horn harness plug (black) goes into the slot around the 10 o'clock position on the steering wheel otherwise you can damage the plug. |
|
02-05-2014, 04:25 PM | #12 |
Drives: 2008 Vette Join Date: May 2013
Location: Cape Cod, MA
Posts: 34
|
Andrew,
Thanks for the info. If I can send in the core, what is your estimate to deliver the new wheel? Deep in winter in New England but My car will finally hit the road the end of March and after 4 months in the garage I don't want to loose a several weeks or more of driving. TRC7 |
02-05-2014, 08:40 PM | #13 |
TheDoubleAA.com
Drives: 2008 Corvette Coupe ZHZ 269of500 Join Date: Aug 2011
Location: League City Texas
Posts: 185
|
if you send yours in we can do a rush so theres little down time. I think if you sent in by the end of week you'd have it before end of march easy.
|
03-22-2014, 12:53 PM | #14 |
TheDoubleAA.com
Drives: 2008 Corvette Coupe ZHZ 269of500 Join Date: Aug 2011
Location: League City Texas
Posts: 185
|
ttt
|
|
|
|
|