★NEW!! Z06 & GS Carbon Fiber Exterior Parts - in O.E Factory Matching Weave!

TKO Performance · 01-16-2017, 12:22 PM

Beautiful GM O.E Matching Carbon Fiber For Your Z06 or GS!

Why have mix matched carbon parts on your expensive ride?
We have the OE GM Matching weave! Enhance your Z06's or Grand Sports appearance with
rich-looking, racing-inspired aesthetics. Made from high-quality, lightweight 3K twill carbon fiber material that matches the GM OE carbon fiber, along with vinyl ester-infused resin, for exceptional strength and appearance characteristics.

Z06 Carbon Fiber Hood Vent Insert

Replaces the factory insert. .
Done in O.E factory matching 3k twill carbon fiber.
Goes in the same direction as the Hood!
Installation takes less than 30 minutes and uses factory fasteners supplied with the kit.

Read More/Purchase: http://store.tkoperformance.com/z06cafihovei.html

Available for the new GS too! (GS uses the LT1 Vent not Z06. Contact us for the correct vent) ___________________________

Z06 & GS Carbon Front wheel Flares

Offered in exposed carbon fiber that matches the production weave, they provide extra coverage for wider wheels and a more aggressive appearance.

Read More/Purchase: http://store.tkoperformance.com/z06omacafrwh.html

_______________________________

Z06 Carbon Fiber Front Fender Inserts

Replaces the factory “gills” in the Z06 front fenders, enhancing the car’s appearance and complementing additional carbon fiber accessories. The inserts easily replace the original components using the factory fasteners.
Matching O.E Weave.

Read More/Purchase: http://store.tkoperformance.com/z06omacafifr.html

_________________________________

Carbon Fiber Rear Diffuser

Replaces factory diffuser.
Comes in matching O.E weave.

Read More/Purchase: http://store.tkoperformance.com/c7cafiredi.html

____________________________

Z06 & GS Carbon Fiber Targa Bar (Halo)

This beautiful Halo/targa bar comes in a O.E matching carbon finish. You can leave it, paint the ends or completely paint it the factory color.
(We don't paint)
The carbon matches the factory weave so it flows from front to back..

Read More/Purchase:
http://store.tkoperformance.com/z06omacafita.html

_______________________

Z06, GS Carbon Fiber Rear Quarter Intake Ducts

Based on the design of the production Z06 ducts, these aerodynamically optimized accessories complement other carbon fiber compoenents listed. They also fit 2014+ Stingray models, enabling a 50-percent increase in airflow over the Stingray’s ducts.

When ordering, choose "GM Z06 O.E weave" to match your existing pattern.

Read More/Purchase: http://store.tkoperformance.com/cafirequindu.html

__________________________

Carbon Fiber Rear Spoiler & Wicker

The ideal accessory for enhancing cornering capability and high-speed stability on the track, this new spoiler matches the GM carbon fiber specification and features an adjustable, downforce-enhancing wicker (also known as a Gurney flap). Use it with Z06 Carbon Fiber front splitter and new ConceptZ rockers for the maximum aerodynamic benefit.
The rear spoiler and wicker are sold separately:

Read More/Purchase: http://store.tkoperformance.com/z06cafirespw.html

___________________________

ConceptZ Side rockers

Adding high-performance visual distinction, these rich-looking rockers also help generate more downforce at higher speeds.

Read More/Purchase: http://store.tkoperformance.com/stz06cosiro.html

_____________________________

Z06 Carbon Fiber Rear Brake Ducts

Based on the design of the production Z06 brake intake and rear cooling ducts, they add visual distinction with the premium appearance of authentic carbon fiber.

Read More/Purchase: http://store.tkoperformance.com/coz06cafireb.html

___________________

Parts take approx. 10-14 business days to ship.
If you have any questions feel free to email us at sales@tkoperformance.com.
OR
Call us 1800 778 9898 from 9-4:30 m-f

Thank you for reading this thread

:cheers:

01-16-2017, 12:22 PM	#1
TKO Performance Drives: 64 & 07 Corvette Join Date: Aug 2009 Location: LI NY Posts: 114	★NEW!! Z06 & GS Carbon Fiber Exterior Parts - in O.E Factory Matching Weave! *Beautiful GM O.E Matching Carbon Fiber For Your Z06 or GS!* Why have mix matched carbon parts on your expensive ride? We have the OE GM Matching weave! Enhance your Z06's or Grand Sports appearance with rich-looking, racing-inspired aesthetics. Made from high-quality, lightweight 3K twill carbon fiber material that matches the GM OE carbon fiber, along with vinyl ester-infused resin, for exceptional strength and appearance characteristics. Z06 Carbon Fiber Hood Vent Insert Replaces the factory insert. . Done in O.E factory matching 3k twill carbon fiber. Goes in the same direction as the Hood! Installation takes less than 30 minutes and uses factory fasteners supplied with the kit. Read More/Purchase: http://store.tkoperformance.com/z06cafihovei.html Available for the new GS too! (GS uses the LT1 Vent not Z06. Contact us for the correct vent) ___________________________ Z06 & GS Carbon Front wheel Flares Offered in exposed carbon fiber that matches the production weave, they provide extra coverage for wider wheels and a more aggressive appearance. Read More/Purchase: http://store.tkoperformance.com/z06omacafrwh.html _______________________________ Z06 Carbon Fiber Front Fender Inserts Replaces the factory “gills” in the Z06 front fenders, enhancing the car’s appearance and complementing additional carbon fiber accessories. The inserts easily replace the original components using the factory fasteners. Matching O.E Weave. Read More/Purchase: http://store.tkoperformance.com/z06omacafifr.html _________________________________ Carbon Fiber Rear Diffuser Replaces factory diffuser. Comes in matching O.E weave. Read More/Purchase: http://store.tkoperformance.com/c7cafiredi.html ____________________________ Z06 & GS Carbon Fiber Targa Bar (Halo) This beautiful Halo/targa bar comes in a O.E matching carbon finish. You can leave it, paint the ends or completely paint it the factory color. (We don't paint) The carbon matches the factory weave so it flows from front to back.. Read More/Purchase: http://store.tkoperformance.com/z06omacafita.html _______________________ Z06, GS Carbon Fiber Rear Quarter Intake Ducts Based on the design of the production Z06 ducts, these aerodynamically optimized accessories complement other carbon fiber compoenents listed. They also fit 2014+ Stingray models, enabling a 50-percent increase in airflow over the Stingray’s ducts. When ordering, choose "GM Z06 O.E weave" to match your existing pattern. Read More/Purchase: http://store.tkoperformance.com/cafirequindu.html __________________________ Carbon Fiber Rear Spoiler & Wicker The ideal accessory for enhancing cornering capability and high-speed stability on the track, this new spoiler matches the GM carbon fiber specification and features an adjustable, downforce-enhancing wicker (also known as a Gurney flap). Use it with Z06 Carbon Fiber front splitter and new ConceptZ rockers for the maximum aerodynamic benefit. The rear spoiler and wicker are sold separately: Read More/Purchase: http://store.tkoperformance.com/z06cafirespw.html ___________________________ ConceptZ Side rockers Adding high-performance visual distinction, these rich-looking rockers also help generate more downforce at higher speeds. Read More/Purchase: http://store.tkoperformance.com/stz06cosiro.html _____________________________ Z06 Carbon Fiber Rear Brake Ducts Based on the design of the production Z06 brake intake and rear cooling ducts, they add visual distinction with the premium appearance of authentic carbon fiber. Read More/Purchase: http://store.tkoperformance.com/coz06cafireb.html ___________________ Parts take approx. 10-14 business days to ship. If you have any questions feel free to email us at sales@tkoperformance.com. OR Call us 1800 778 9898 from 9-4:30 m-f Thank you for reading this thread :cheers: