Best exhaust option

Jbanta1983 · 07-23-2019, 07:01 PM

Hey guys, was wondering what I can do to get a little more sound out of the exhaust while maintaining warranty, still having control of the dual mode, and still being able to pass inspection. I do not want headers.. thanks guys

Rnovrit · 07-23-2019, 09:06 PM

Borla S-type. Not too loud until you want it to be, good quality and sounds awesome. You will retain all exhaust controls. I have it on mine. Before installing, I had the entire system ceramic coated. Helps with heat and looks great.

orange devil · 07-23-2019, 09:33 PM

Quote:

Originally Posted by Rnovrit

Borla S-type. Not too loud until you want it to be, good quality and sounds awesome. You will retain all exhaust controls. I have it on mine. Before installing, I had the entire system ceramic coated. Helps with heat and looks great.

It looks as pretty as it sounds!!! Very nice

Jbanta1983 · 07-23-2019, 09:44 PM

Quote:

Originally Posted by Rnovrit

Borla S-type. Not too loud until you want it to be, good quality and sounds awesome. You will retain all exhaust controls. I have it on mine. Before installing, I had the entire system ceramic coated. Helps with heat and looks great.

What is the exact system you have? Im going to go with that

Jbanta1983 · 07-23-2019, 09:45 PM

Quote:

Originally Posted by Rnovrit

Borla S-type. Not too loud until you want it to be, good quality and sounds awesome. You will retain all exhaust controls. I have it on mine. Before installing, I had the entire system ceramic coated. Helps with heat and looks great.

Is that just mufflers??

enzia35 · 07-23-2019, 09:54 PM

Looks like yes, just the mufflers. I would get the ATAK for the loudest sound possible. Part number 11925.

Rnovrit · 07-23-2019, 09:55 PM

Thank you Elvis66. It is the Borla s-type full catback #140-726 for the ZL1. Not sure if an SS takes a different kit. The system comes bare stainless steel. I had the catback and factory cats ceramic coated as well to match. The cat back is ceramic coated in two different colors. Silver for the front section/factory cats and black for the rear section. I did black to make the mufflers and tailpipes less obvious and the black does not require to be baked on. Baking the tail pipe sections would damage the return springs that operate the exhaust valves. The actuators open the valves but the spring to close them is part of the tailpipe.

Clearly_Canadian · 07-24-2019, 12:35 AM

I have the s-type (#11924). love the sound, louder than stock but only obnoxious when your really on it. Maintains NPP adjustability too. Pricey, but worth every penny.

WhyUMad1LE · 07-24-2019, 02:39 AM

For NPP get Flowmaster if you like a deep sound and Borla if you like a throaty sound. The other systems don’t seem to have a very effective quiet mode.

MR.1LE · 07-24-2019, 04:35 AM

Any check engine lights with the Borla S-Type???

Jeffadd · 07-24-2019, 06:30 AM

just remove the 2nd set of cat's it will sound alot louder. that wont void your warranty and unless your in cali i doubt anyone will ever look or say anything. /shrug best change in sound you can do for the cheapest price.

JT58 · 07-24-2019, 07:09 AM

Any axle back will give you more sound. My V6 was way too quiet so I just installed the MBRP axle back. Just right now and it was so easy to install. It's your choice which one to go with. Read the posts and listen to the videos.

enzia35 · 07-24-2019, 09:29 AM

Quote:

Originally Posted by MR.1LE

Any check engine lights with the Borla S-Type???

Only if it's not installed correctly.

kropscamaro16 · 07-24-2019, 11:48 AM

afe power makes axleback that works with npp i have it works great

07-23-2019, 09:06 PM	#2
Rnovrit Drives: 2018 NFG ZL1-1LE Join Date: Jun 2018 Location: Near the water Posts: 304	Borla S-type. Not too loud until you want it to be, good quality and sounds awesome. You will retain all exhaust controls. I have it on mine. Before installing, I had the entire system ceramic coated. Helps with heat and looks great. Attached Images

07-23-2019, 09:54 PM	#6
enzia35 Drives: '16 Garnet Red 1SS Join Date: Mar 2014 Location: College Station, TX Posts: 3,450	Looks like yes, just the mufflers. I would get the ATAK for the loudest sound possible. Part number 11925. __________________ '16 Camaro 1SS '18 Miata GT Gone: '01 Camaro, '14 Camaro, '90 Miata

07-23-2019, 09:55 PM	#7
Rnovrit Drives: 2018 NFG ZL1-1LE Join Date: Jun 2018 Location: Near the water Posts: 304	Thank you Elvis66. It is the Borla s-type full catback #140-726 for the ZL1. Not sure if an SS takes a different kit. The system comes bare stainless steel. I had the catback and factory cats ceramic coated as well to match. The cat back is ceramic coated in two different colors. Silver for the front section/factory cats and black for the rear section. I did black to make the mufflers and tailpipes less obvious and the black does not require to be baked on. Baking the tail pipe sections would damage the return springs that operate the exhaust valves. The actuators open the valves but the spring to close them is part of the tailpipe. Last edited by Rnovrit; 07-23-2019 at 10:16 PM.

07-24-2019, 12:35 AM	#8
Clearly_Canadian Drives: 2017 2SS Camaro Join Date: Mar 2015 Location: British Columbia Posts: 366	I have the s-type (#11924). love the sound, louder than stock but only obnoxious when your really on it. Maintains NPP adjustability too. Pricey, but worth every penny. __________________ 2017 Camaro 2SS, K&N Air, Borla S-Type, Cat Delete, 1LE replicas, Hotchkis Swaybars, Eibach Springs. ALL BMR arms, end links, chassis braces and cradle lockout. Hurst shifter.

07-24-2019, 07:09 AM	#12
JT58 Drives: Former 2016 Camaro 1LT Join Date: Jan 2017 Location: Naples, FL Posts: 760	Any axle back will give you more sound. My V6 was way too quiet so I just installed the MBRP axle back. Just right now and it was so easy to install. It's your choice which one to go with. Read the posts and listen to the videos. __________________ 2006 C6 Corvette Manual, 2019 Silverado, 1997 Jeep Wrangler

07-23-2019, 07:01 PM	#1
Jbanta1983 Drives: 2019 2ss 1LE Join Date: Mar 2019 Location: Kennett square, PA Posts: 307	Best exhaust option Hey guys, was wondering what I can do to get a little more sound out of the exhaust while maintaining warranty, still having control of the dual mode, and still being able to pass inspection. I do not want headers.. thanks guys

07-24-2019, 02:39 AM	#9
WhyUMad1LE Drives: 17 SS 1LE Join Date: Dec 2015 Location: Houston Posts: 1,920	For NPP get Flowmaster if you like a deep sound and Borla if you like a throaty sound. The other systems don’t seem to have a very effective quiet mode.

07-24-2019, 04:35 AM	#10
MR.1LE Drives: 2019 1LE Join Date: Jul 2019 Location: South Florida Posts: 65	Any check engine lights with the Borla S-Type???

07-24-2019, 06:30 AM	#11
Jeffadd Drives: 2019 camaro Join Date: Jun 2019 Location: NC Posts: 13	just remove the 2nd set of cat's it will sound alot louder. that wont void your warranty and unless your in cali i doubt anyone will ever look or say anything. /shrug best change in sound you can do for the cheapest price.

07-24-2019, 11:48 AM	#14
kropscamaro16 Drives: 2016 1ss camaro Join Date: Feb 2016 Location: 909 Posts: 9,817	afe power makes axleback that works with npp i have it works great __________________ 16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS

User Name		Remember Me?
Password