6th gen wheels on 5th gen - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

zr1chris · 04-14-2016, 04:56 PM

Ive been wanting them for mine ever since seeing a 6th gen side by side with my car.

First time ive seen it done and it looks great imo.

thegreatwhite · 04-14-2016, 05:13 PM

clean.

GrandAmGT · 04-14-2016, 08:54 PM

I vote "yes." The look good.

ActNup NY · 04-15-2016, 06:01 AM

Looks cool !!

SEOhioSS · 04-17-2016, 09:00 PM

Quote:

Originally Posted by JorgeSS

Do they rub or pop out of the fender?
Looks nice!

Don't rub as best i can tell. Fit pretty much the same. The sidewall is slightly shorter so my speedometer is off a few miles an hour. Other than that pretty smooth so far.

CVHKji · 04-18-2016, 11:57 AM

I think the black 6th gen wheels would look a little better than these.

Alex Murphy · 05-22-2016, 12:50 PM

Did you have to use wheel spacers?

SummitWhite11 · 05-23-2016, 09:23 PM

Not liking it at all. Looks like it doesn't belong and better suited for the 6th Gen. The wheels do look like they sit inboard a little though.

Clammy Clemens · 05-23-2016, 10:23 PM

Quote:

Originally Posted by ChibiBlackSheep

Is there less sidewall on the 6th gen? Looks like too thin of a tire on that car.

That's what I was thinking.

FloridaBill · 05-24-2016, 10:26 AM

I think it looks great, wouldn't mind putting a set on mine.

45thCamaro · 05-24-2016, 10:33 AM

Quote:

Originally Posted by Backspin9

There are some Gen 6 wheels that are kind of similar to those that were used on the LS7:

I always liked the LS7 wheels and want to put a set on my car. Always liked chrome more than the painted wheels. It's a little old school but they really stand out.

These wheels look just like the 45th wheels

Alex Murphy · 05-29-2016, 05:55 PM

I just put the black split spoke on my car with 3mm spacers.

brkntires · 05-30-2016, 11:51 AM

Quote:

Originally Posted by L99CAMA2011

Gen 6 Camaro SS tires are around 27.7" outside diameter where as the gen 5s are 28.7" diameter so about 1" total difference with .5" lower stance.

also

2016+ 20" wheel specs
Front Wheel 20x8.5
Front Tire SizeP245/40ZR20
Rear Wheel 20x9.5
Rear Tire SizeP275/35ZR20
~27.7"

2010-2015 2-" wheel specs (except 1LE,ZL1 and Z28 of course)
Front Wheel 20x8.5
Front Tire SizeP245/45ZR20
Rear Wheel 20x9.5
Rear Tire SizeP275/40ZR20
~28.7"

Let me know if I got anything incorrect.

brkntires · 05-30-2016, 11:53 AM

Quote:

Originally Posted by Alex Murphy

I just put the black split spoke on my car with 3mm spacers.

were the spacers needed for caliper clearance?

04-15-2016, 06:01 AM	#46
ActNup NY Drives: 2011 1LT Black Camaro Join Date: Feb 2012 Location: Queens, NYC Posts: 2,496 View My Garage	Looks cool !! __________________ *The DREAM is free... It's the HUSTLE that is sold seperately*

05-24-2016, 10:26 AM	#52
FloridaBill Drives: 2022 2SS 1LE Join Date: May 2014 Location: St Augustine, Florida Posts: 547	I think it looks great, wouldn't mind putting a set on mine. __________________ 8/27:Ordered 2022 Vivid Orange Metallic 2SS1LE 11/09:Built 12/4:Took it home

05-29-2016, 05:55 PM	#54
Alex Murphy Drives: 2012 Camaro 2SS/RS M6 Join Date: Feb 2016 Location: Saugerties, NY Posts: 125	I just put the black split spoke on my car with 3mm spacers. I just put the black split spoke on my car with 3mm spacers. Attached Images

04-14-2016, 04:56 PM	#43
zr1chris Drives: 2018 Camaro 1SS/1LE Join Date: Feb 2015 Location: Port Saint Lucie FL Posts: 1,224	Ive been wanting them for mine ever since seeing a 6th gen side by side with my car. First time ive seen it done and it looks great imo.

04-14-2016, 05:13 PM	#44
thegreatwhite Drives: 2014 SS Join Date: Aug 2014 Location: Norcal Posts: 315	clean.

04-14-2016, 08:54 PM	#45
GrandAmGT Drives: 2010 1LT & 2016 Cadillac CTS V6 Join Date: Apr 2015 Location: Danville, Virginia Posts: 369	I vote "yes." The look good.

04-18-2016, 11:57 AM	#48
CVHKji Drives: ford Join Date: Apr 2016 Location: uk Posts: 4	I think the black 6th gen wheels would look a little better than these.

05-22-2016, 12:50 PM	#49
Alex Murphy Drives: 2012 Camaro 2SS/RS M6 Join Date: Feb 2016 Location: Saugerties, NY Posts: 125	Did you have to use wheel spacers?

05-23-2016, 09:23 PM	#50
SummitWhite11 Drives: 2010 2LT/RS Join Date: Mar 2015 Location: Palm Coast, FL Posts: 1,175	Not liking it at all. Looks like it doesn't belong and better suited for the 6th Gen. The wheels do look like they sit inboard a little though.