Lingenfelter Performance Engineering Customers - Page 526 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Blue70SS · 07-27-2012, 10:14 AM

Quote:

Originally Posted by Ryan@Lingenfelter

OK, we have put together all of the information for the raffle to ride along with Danny in the Optima Challenge L28. Tickets will be $5ea and all of the proceeds will be donated to The Lone Survivor Foundation. Click here for more information and to purchase your tickets!

Ryan

Went on website to purchase 4 tickets..... shows a $6 frieght/handling fee. Should it? ..... I suppose nothing gets mailed.

Blue70SS · 07-27-2012, 10:36 AM

Quote:

Originally Posted by paul2010

I will be there.

See you there - will be interested in your mod plans

Quote:

Originally Posted by 600hp-lpe

Hi Garth, more info on the oil cooler please. What did you use on the block to attach the lines to it?

My oil temp was pretty high at the track after running a few setups. Temp was mid 80's during the day. I am going to start focusing on larger coolers for oil, trans and rear end (same as you).

TPIS oil cooler adapter (looks same as LPE one) and we flipped it upside down for better line routing. Fluiddyne oil cooler DB-30417 12an (adapted to 10an of oil cooler adapter), lots of an fittings including 3-90s and 1-45,10an stainless hose, silicone fire sleeve. I'm looking into adding an accurate temp sensor to the inlet side of the oil cooler where there's an access plug already - probably do when ice box is added later.

Fluiddyne dual pass specs:
Overall Height (in)
6.250 in.

Overall Width (in)
14.750 in.

Overall Thickness (in)
2.750 in.

Ryan@Lingenfelter · 07-27-2012, 10:58 AM

Quote:

Originally Posted by Blue70SS

Went on website to purchase 4 tickets..... shows a $6 frieght/handling fee. Should it? ..... I suppose nothing gets mailed.

Garth,
The site should say that the freight amount includes $6 handiling fee, but the ship via field should say "unable to calculate freight" because there is no shipping. If you proceed to the next page of the checkout the total should not have any shipping. Let me know if that is the not the case.

Thank you,
Ryan

JusticePete · 07-27-2012, 11:10 AM

Ryan,

I'll take 10, but I want a PINK receipt

Blue70SS · 07-27-2012, 11:52 AM

Quote:

Originally Posted by Ryan@Lingenfelter

Garth,
The site should say that the freight amount includes $6 handiling fee, but the ship via field should say "unable to calculate freight" because there is no shipping. If you proceed to the next page of the checkout the total should not have any shipping. Let me know if that is the not the case.

Thank you,
Ryan

All done..... thanks

mws444 · 08-04-2012, 04:13 PM

Hey guys where is our LPE update from the drag strip action at the fest?
Gota help out the brothers who are stuck doing the working thing.

paul2010 · 08-04-2012, 04:23 PM

It rained so they loaded up and went home.

Quote:

Originally Posted by mws444

Hey guys where is our LPE update from the drag strip action at the fest?
Gota help out the brothers who are stuck doing the working thing.

se7en · 08-05-2012, 09:19 PM

Very nice to finally put faces with names this weekend. It was a pleasure to meet Dan, Garth, Pete, Danny and many others that i havent had the pleasure of meeting in the past. Cant wait to see you all again soon!!

Dan, your daughter is adorable and my family enjoying talking to you and your family. Glad i got to spend some time with you at Bruce's as well.

Garth, you had my mom (pit crew)

smiling for remember the storys i told you on here years ago. I really appreciated spending time talking with you and your family. My family mentioned having a great time talking with you and your family as well....very much appreciated. We found some problems my car is having and will be tackling them starting Monday morning. I will update you on my changes since you and i spoke so much about both of our cars. Looking forward to meeting you again.

Hope everyone had a safe trip home. I dont know about you guys, but im exhausted

Ryan@Lingenfelter · 08-06-2012, 07:35 PM

It was good to see everyone over the weekend and finally putting a face with a name with some people. I hope everyone had fun!

Ryan

600hp-lpe · 08-06-2012, 09:29 PM

Quote:

Originally Posted by mws444

Hey guys where is our LPE update from the drag strip action at the fest?
Gota help out the brothers who are stuck doing the working thing.

I know Garth made it into the quickest top 16..

and Brandon (se7en) should have made it as well with that awesome car he has. Brandon had run a 10.8 when I spoke with him.

Rain on Saturday afternoon killed the event shoot out..

I had a great time on the autocross track. I think I brought almost every Moderator that attended the fest for a ride in my car...

600hp-lpe · 08-06-2012, 09:38 PM

Quote:

Originally Posted by se7en

Very nice to finally put faces with names this weekend. It was a pleasure to meet Dan, Garth, Pete, Danny and many others that i havent had the pleasure of meeting in the past. Cant wait to see you all again soon!!

Dan, your daughter is adorable and my family enjoying talking to you and your family. Glad i got to spend some time with you at Bruce's as well.

Garth, you had my mom (pit crew)

smiling for remember the storys i told you on here years ago. I really appreciated spending time talking with you and your family. My family mentioned having a great time talking with you and your family as well....very much appreciated. We found some problems my car is having and will be tackling them starting Monday morning. I will update you on my changes since you and i spoke so much about both of our cars. Looking forward to meeting you again.

Hope everyone had a safe trip home. I dont know about you guys, but im exhausted

Brandon, It was a pleasure to meet you. I especially enjoyed the short (and spirited) ride in front of Bruce's shop on Thursday for your testing.

That gives new meaning to junk in the trunk!

Garth came over and ran the AutoX course with his car. I know he had a lot of fun. We had a good time at dinner on Saturday.

I made it home.. no issues except for a rather large bird that decided to go under my tire. RIP birdie...:(

grocerygetter · 08-07-2012, 11:09 AM

great meeting a lot of you guys at the Fest.

john sketoe

se7en · 08-07-2012, 11:21 AM

Quote:

Originally Posted by 600hp-lpe

Brandon, It was a pleasure to meet you. I especially enjoyed the short (and spirited) ride in front of Bruce's shop on Thursday for your testing.

That gives new meaning to junk in the trunk!

Garth came over and ran the AutoX course with his car. I know he had a lot of fun. We had a good time at dinner on Saturday.

I made it home.. no issues except for a rather large bird that decided to go under my tire. RIP birdie...:(

Poor birdie

He should have known better to get in front of that rig you call a truck. Very nice!

Glad to have you along on the ride, just wish i would have had more time to get a ride in yours at the fest. That car is beautiful and just as badass as i expected! Garth and I both made the quick 16, but i had some engine trouble and lost to a 10.9 while i ran a 11.04 (the worst of all my runs). I red lighted or an almost perfect light (.009) as i like to call it

but that didnt matter since it was heads up and he ran faster than me anyways. Eric from Raymonds found out that my intercooler pump for the maggie wasnt working and causing way more heat than normal. Its currently at the shop having some things done to it and getting some wiring done.

Glad you made it home safe

600hp-lpe · 08-07-2012, 11:40 AM

Thanks Brandon.. It was a blast meeting you.. I really like what you have done to your car.

Mike Surratt - you would Approve - Brandon has a bad ass LPE/Pedders customer drag car..

hanging out at Bruce's shop (Raymond's performance) was awesome. Pete asked me WHY I wanted to go to RAYMOND'S PERFORMANCE on Thursday when I didn't need to.. I replied "Hey.. I'm a car guy.. it's what I do". Hell - half the fun of cars is wrenching on them. I was glad to get my hands dirty and help with stuff, after sitting in the truck for so long.

08-04-2012, 04:13 PM	#7356
mws444 Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009 Location: El Paso Posts: 2,973	Hey guys where is our LPE update from the drag strip action at the fest? Gota help out the brothers who are stuck doing the working thing. __________________ Lingenfelter forged balanced and blueprinted LS3, Maggie TVS 2300 LPE 9.5" Rearend 3.73,LPE dual disk clutch,10/14 rib belt drive, MTI shifter,RPM Level VI,Corsa stainless cat back, Racing Brake Rotors, LPE calipers, LPE twin fuel pumps, American Racing long tube headers, GT9 cam Port and polished heads and an ADM majic tune. 701 RWHP,Fully Pedderized w/complete bushings and Sportsryder Supercar Remote resevior coilovers. CCW 505t's Nitto Invo's and DR's Beware of the LPE Brotherhood!

08-07-2012, 11:09 AM	#7362
grocerygetter instigator Drives: 2020 6.2 Trail Boss, 2022 XC90 Join Date: Jan 2010 Location: 72034 Posts: 3,979 View My Garage	great meeting a lot of you guys at the Fest. john sketoe __________________ -John S.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lingenfelter 2010 Camaro Engine Packages Including New Vehicle Now Available	Tim@Lingenfelter	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	6	06-18-2010 07:11 AM
Lingenfelter 2010 Camaro Engine Packages - up to 800hp!	Sizzox	5th Gen Camaro SS LS LT General Discussions	108	04-14-2010 07:09 PM
My Lingenfelter Camaro Build	Speed74SS	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	244	10-08-2009 10:00 PM
Lingenfelter Supercharged Camaro makes 600 RWHP!!	Kevin@Lingenfelter	Forced Induction - V8	218	06-24-2009 02:26 PM
Three 2010 Camaros Arrive at Lingenfelter Performance Engineering	Sizzox	5th Gen Camaro SS LS LT General Discussions	25	04-26-2009 01:15 PM

07-27-2012, 11:10 AM	#7354
JusticePete Drives: Camaro Justice Join Date: Jun 2007 Location: Virginia Posts: 20,174	Ryan, I'll take 10, but I want a PINK receipt

08-05-2012, 09:19 PM	#7358
se7en Drives: 10 Procharged SS Join Date: Oct 2009 Location: The creek at the end of the dead end road Posts: 1,857	Very nice to finally put faces with names this weekend. It was a pleasure to meet Dan, Garth, Pete, Danny and many others that i havent had the pleasure of meeting in the past. Cant wait to see you all again soon!! Dan, your daughter is adorable and my family enjoying talking to you and your family. Glad i got to spend some time with you at Bruce's as well. Garth, you had my mom (pit crew) smiling for remember the storys i told you on here years ago. I really appreciated spending time talking with you and your family. My family mentioned having a great time talking with you and your family as well....very much appreciated. We found some problems my car is having and will be tackling them starting Monday morning. I will update you on my changes since you and i spoke so much about both of our cars. Looking forward to meeting you again. Hope everyone had a safe trip home. I dont know about you guys, but im exhausted

08-06-2012, 07:35 PM	#7359
Ryan@Lingenfelter Drives: 1998 Camaro Z28 Join Date: Sep 2009 Location: Indiana Posts: 172	It was good to see everyone over the weekend and finally putting a face with a name with some people. I hope everyone had fun! Ryan

08-07-2012, 11:40 AM	#7364
600hp-lpe Drives: 2010 Join Date: Jul 2009 Location: NH Posts: 4,788	Thanks Brandon.. It was a blast meeting you.. I really like what you have done to your car. Mike Surratt - you would Approve - Brandon has a bad ass LPE/Pedders customer drag car.. hanging out at Bruce's shop (Raymond's performance) was awesome. Pete asked me WHY I wanted to go to RAYMOND'S PERFORMANCE on Thursday when I didn't need to.. I replied "Hey.. I'm a car guy.. it's what I do". Hell - half the fun of cars is wrenching on them. I was glad to get my hands dirty and help with stuff, after sitting in the truck for so long.