ADM LPE 416 TVS 2300 BUILD - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Nine Ball · 03-20-2010, 03:54 PM

Quote:

Originally Posted by ADM PERFORMANCE

We make them in house,we also sell them.If you do what we do everyday,it saves countless hours ,plus it is the way they are built at the factory.

Andy

Thanks for the response. I dig the cart, will fire up my MIG and build one someday. I like how yours seems to be universal, just using square tube laid across the top to match specific width points. I don't use stuff like this often, most of the time they just get in my way, lol.

What PSI are you seeing the rear 10-rib belt slipping at? That 14-rib looks like a monster.

ADM PERFORMANCE · 03-20-2010, 06:57 PM

Quote:

Originally Posted by Nine Ball

Thanks for the response. I dig the cart, will fire up my MIG and build one someday. I like how yours seems to be universal, just using square tube laid across the top to match specific width points. I don't use stuff like this often, most of the time they just get in my way, lol.

What PSI are you seeing the rear 10-rib belt slipping at? That 14-rib looks like a monster.

We do it on every car that makes over 650 rwhp.

Just uploaded more pics of the final setup.

ADM PERFORMANCE · 03-23-2010, 09:29 PM

Monday I spent the day prepping under the hood for the blower install.

Created some custom parts for the LPE AIR OIL SEPERATOR as well.

Here are the final pics :

Put some miles on it the next 2 days,then hit the dyno

Melson · 03-23-2010, 10:40 PM

Quote:

Originally Posted by ADM PERFORMANCE

Monday I spent the day prepping under the hood for the blower install.

Created some custom parts for the LPE AIR OIL SEPERATOR as well.

Here are the final pics :

Put some miles on it the next 2 days,then hit the dyno

Does not look like the same car when I was there Monday!

Looks Great Andy

Mark

SSMagna · 03-23-2010, 10:44 PM

Thanks Andy! Your attention to detail definitely shows in your work. That's what you can expect from ADM on anything mild to wild. He takes the time to do it right but also gets it done fast. If your thinking of doing any mods to your camaro I recommend ADM all the way! Another proud customer.
Andy thanks again you doubled my horsepower and cut my tire life in half!

I can't wait for the 12 hours cruise to camaro5 fest now for sure!!! Good thing I got a new radar detector. I'm going to need it.

*radz28* · 03-23-2010, 11:12 PM

That is all...

bumblebeecamaro · 03-23-2010, 11:12 PM

that engine work looks awesome, but I can't imagine what all that must cost.

heck, I've got over $10K tied up in my TVS 2300 setup (w/ LT headers and a few other goodies) but it isn't no where near what that engine is set up to do.

ADM PERFORMANCE · 03-24-2010, 06:31 AM

Thanks for the replys.We do the best possible job available..I always try to 1 up my self on each build,this keeps it exciting

Robert91RS · 03-24-2010, 08:43 AM

I'm loosin my mind here guys. I don't see the pics! I don't even see any red Xs! I can't take it any more....

..I'm missing Andys build and its makin me sick to my stomach. Anybody know what is going on with my computer?

JANNETTYRACING · 03-24-2010, 10:06 AM

The Green Belt Looks RAD, I run those belts on my blowers they won't die.

Ted.

RedJewel2SS · 03-24-2010, 01:35 PM

what is that cylinder lookin thing next to the intake box?????

this build looks AWESOME!!!!

i only wish i could afford to do this!

Crowley · 03-24-2010, 05:42 PM

Quote:

Originally Posted by RedJewel2SS

what is that cylinder lookin thing next to the intake box?????

this build looks AWESOME!!!!

i only wish i could afford to do this!

I think that is the LPE AIR OIL SEPERATOR

Crowley

ADM PERFORMANCE · 03-24-2010, 06:15 PM

Quote:

Originally Posted by Crowley

I think that is the LPE AIR OIL SEPERATOR

Crowley

Your exactly right

ADM PERFORMANCE · 03-24-2010, 06:21 PM

Drove the car home tonight,Looks like another solid build.
Hopefully tommorow morning I can hit the road (40 +MILES)early and get a few more miles on it.

The Pfadt,BMR suspension parts sure like each other,The car has a great stance and almost 0 body roll.The rear end feelsmuch more solid with the upper and lower arms installed as well.

This car looks good parked next to my(actually the new owners) Camaro in the Garage...Makes me want to go get another one

Andy

03-23-2010, 09:29 PM	#31
ADM PERFORMANCE Drives: Anything I want Join Date: Oct 2008 Location: DfW - Texas Posts: 5,405	Day 4 Monday I spent the day prepping under the hood for the blower install. Created some custom parts for the LPE AIR OIL SEPERATOR as well. Here are the final pics : Put some miles on it the next 2 days,then hit the dyno

03-23-2010, 11:12 PM	#34
radz28 Petro-sexual Drives: Ultra-Grin Join Date: Oct 2006 Location: Crazy Coast Posts: 15,230 View My Garage	That is all... __________________ '20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs

03-23-2010, 11:12 PM	#35
bumblebeecamaro Car Lover By Nature Drives: 2016 Hyper Blue Metallic SS Join Date: Dec 2009 Location: Central FL Posts: 2,327 View My Garage	that engine work looks awesome, but I can't imagine what all that must cost. heck, I've got over $10K tied up in my TVS 2300 setup (w/ LT headers and a few other goodies) but it isn't no where near what that engine is set up to do. __________________

03-24-2010, 08:43 AM	#37
Robert91RS Drives: Everywhere Join Date: Jun 2008 Location: TX Posts: 852	I'm loosin my mind here guys. I don't see the pics! I don't even see any red Xs! I can't take it any more......I'm missing Andys build and its makin me sick to my stomach. Anybody know what is going on with my computer?

03-24-2010, 10:06 AM	#38
JANNETTYRACING Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009 Location: ON THE DYNO WATERBURY CT. Posts: 15,230	The Green Belt Looks RAD, I run those belts on my blowers they won't die. Ted. __________________ www.jannettyracing.com Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com

03-23-2010, 10:44 PM	#33
SSMagna FAST1 Drives: ADM LSX 427 Twin Turbo #1 Join Date: Jan 2010 Location: Texas Posts: 402	Thanks Andy! Your attention to detail definitely shows in your work. That's what you can expect from ADM on anything mild to wild. He takes the time to do it right but also gets it done fast. If your thinking of doing any mods to your camaro I recommend ADM all the way! Another proud customer. Andy thanks again you doubled my horsepower and cut my tire life in half! I can't wait for the 12 hours cruise to camaro5 fest now for sure!!! Good thing I got a new radar detector. I'm going to need it.

03-24-2010, 06:31 AM	#36
ADM PERFORMANCE Drives: Anything I want Join Date: Oct 2008 Location: DfW - Texas Posts: 5,405	Thanks for the replys.We do the best possible job available..I always try to 1 up my self on each build,this keeps it exciting

03-24-2010, 01:35 PM	#39
RedJewel2SS 12.23s@113mph Drives: 2SS/RS, A6, just a few bolt ons Join Date: Jul 2009 Location: Houston, TX Posts: 1,197	what is that cylinder lookin thing next to the intake box????? this build looks AWESOME!!!! i only wish i could afford to do this! __________________ RIP Cammie 7/15/2009 - 4/1/2011

03-24-2010, 06:21 PM	#42
ADM PERFORMANCE Drives: Anything I want Join Date: Oct 2008 Location: DfW - Texas Posts: 5,405	Drove the car 40 miles Drove the car home tonight,Looks like another solid build. Hopefully tommorow morning I can hit the road (40 +MILES)early and get a few more miles on it. The Pfadt,BMR suspension parts sure like each other,The car has a great stance and almost 0 body roll.The rear end feelsmuch more solid with the upper and lower arms installed as well. This car looks good parked next to my(actually the new owners) Camaro in the Garage...Makes me want to go get another one Andy

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ADM Performance Stage Two Build...	ADM PERFORMANCE	Forced Induction - V8	32	01-17-2012 06:25 PM
Chronicle of the Red Devil - a Lingenfeltered and Pedderized 2010 Camaro	600hp-lpe	Member Car Journals	86	09-14-2011 06:17 AM
LG L99 to LS3 Conversion G5XB Cam and Magnacharger TVS 2300 Results	Bobby @ LG Motorsports	Forced Induction - V8	31	10-27-2010 10:26 AM
I want to get a TVS 2300 but I need some (engine) comforting...	bumblebeecamaro	Forced Induction - V8	25	01-04-2010 07:25 PM
For Sale: 2010 Camaro LPE 427 Built by ADM PERFORMANCE	ADM PERFORMANCE	Autos For Sale / Wanted	3	01-03-2010 04:05 PM