< $20 Lowes Catch Can w/ drain plug - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

motogplvr · 06-21-2014, 07:06 PM

I just saw those at target and they also had copper scrubbing pads which I picked up. Both were 2 bucks at my local target. I picked the copper pads as they definitely won't ever come apart.

Sent from my SCH-I545 using Tapatalk

Casper954 · 06-22-2014, 09:40 PM

very cool concept. never would have thought of that

hammdo · 06-30-2014, 01:52 PM

This forum inspired me to make one using a stainless steel thermos. Thanks for the idea!

Jason@JacFab · 07-09-2014, 09:05 AM

Quote:

Originally Posted by hammdo

This forum inspired me to make one using a stainless steel thermos. Thanks for the idea!

Post pics when you get it done!

RAP2011RSRAGTOP · 07-09-2014, 05:44 PM

MY NEW CATCH CAN

hammdo · 07-09-2014, 09:48 PM

Quote:

Originally Posted by Jason@JacFab

Post pics when you get it done!

Did a DIY for it:

http://www.camaro5.com/forums/showthread.php?t=366135

Only change was to use fuel injector hose to kill the 'hiss' that came from the cheaper hose...

-Don

hammdo · 07-09-2014, 09:49 PM

Quote:

Originally Posted by RAP2011RSRAGTOP

MY NEW CATCH CAN

I like that one -- looks like a remote oil filter adapter like I used on my Piper Warrior!

-Don

karicamaro · 07-10-2014, 01:25 AM

That's a really cool idea ! I just posted about using one of the universal catch cans I seen on ebay for like 30.00 but no one responded. I really don't see what the difference is between the $200.00 rx or elite or the ebay one for $30.00? Maybe Ill try and make my own as well.

RAP2011RSRAGTOP · 07-10-2014, 05:49 AM

HAMMDO, HERE IS A LINK TO THE INFO FOR THE PARTS I USED AND SOME MORE PICS.

ROGER.

http://www.camaro5.com/forums/showthread.php?t=366862

hammdo · 07-10-2014, 01:58 PM

Quote:

Originally Posted by RAP2011RSRAGTOP

HAMMDO, HERE IS A LINK TO THE INFO FOR THE PARTS I USED AND SOME MORE PICS.

ROGER.

http://www.camaro5.com/forums/showthread.php?t=366862

Thanks!

-Don

karicamaro · 07-14-2014, 12:03 AM

Is there any way we can run two of these ? I've been getting a lot of grief some some of the other people on this forum say in that these won't work only the 200.oo ones like elite and rx or apex works...if that's the case if i can run 2 of these 20 Lowe's set ups I'm still 160.00 ahead of the game ! Also OP can you give me a parts list for you set up please ?

karicamaro · 07-14-2014, 03:44 PM

Bump ?

shibbs · 07-14-2014, 03:50 PM

Quote:

Originally Posted by karicamaro

Is there any way we can run two of these ? I've been getting a lot of grief some some of the other people on this forum say in that these won't work only the 200.oo ones like elite and rx or apex works...if that's the case if i can run 2 of these 20 Lowe's set ups I'm still 160.00 ahead of the game ! Also OP can you give me a parts list for you set up please ?

I suppose you could, but it still won't do as much (and definitely won't look as good) as a proper catch-can setup.

You'd want to run the outlet of the first can into the inlet of the second can. Not gonna guarantee how well it will work, but hey, it's worth a shot.

xstuntman · 10-20-2014, 10:29 PM

I finally got around to building mine and mounted it today.

Thought i heard a faint leak but after spraying some wd40 i didn't find anything. Sitting in the driveway it would rev to 3,000rpm and no more. No audible misses, didn't trip any lights, so for now its off and the car runs fine. I blew through the hose and plugged off the other and everything appeared tight.

???

06-22-2014, 09:40 PM	#16
Casper954 Drives: 2010 Camaro 2SS Join Date: Feb 2013 Location: South Florida/ Orlando Posts: 450	very cool concept. never would have thought of that __________________ Appearance: Blacked out tail lights, Oracle Plasma fogs, SLP Carbon Fiber splitter, Carbon Fiber Hash Marks, Carbon Fiber ZL1 hood, 20" Giovanna Kilis rims, Eibach lowering springs Performance: Straight-piped magnaflow exhaust, K&N intake

07-09-2014, 05:44 PM	#19
RAP2011RSRAGTOP Drives: 2018 ZL1 CONV. & 2011 2LT RS CONV. Join Date: Dec 2013 Location: LECANTO, FL. Posts: 67	MY NEW CATCH CAN Attached Images

06-21-2014, 07:06 PM	#15
motogplvr Drives: 2010 1SS M6 460rwhp Join Date: May 2014 Location: Phoenix, AZ Posts: 84	I just saw those at target and they also had copper scrubbing pads which I picked up. Both were 2 bucks at my local target. I picked the copper pads as they definitely won't ever come apart. Sent from my SCH-I545 using Tapatalk

06-30-2014, 01:52 PM	#17
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,695 View My Garage	This forum inspired me to make one using a stainless steel thermos. Thanks for the idea!

07-10-2014, 01:25 AM	#22
karicamaro Drives: 2012 v6 camaro Join Date: May 2014 Location: Pa Posts: 47	That's a really cool idea ! I just posted about using one of the universal catch cans I seen on ebay for like 30.00 but no one responded. I really don't see what the difference is between the $200.00 rx or elite or the ebay one for $30.00? Maybe Ill try and make my own as well.

07-10-2014, 05:49 AM	#23
RAP2011RSRAGTOP Drives: 2018 ZL1 CONV. & 2011 2LT RS CONV. Join Date: Dec 2013 Location: LECANTO, FL. Posts: 67	HAMMDO, HERE IS A LINK TO THE INFO FOR THE PARTS I USED AND SOME MORE PICS. ROGER. http://www.camaro5.com/forums/showthread.php?t=366862

07-14-2014, 12:03 AM	#25
karicamaro Drives: 2012 v6 camaro Join Date: May 2014 Location: Pa Posts: 47	Is there any way we can run two of these ? I've been getting a lot of grief some some of the other people on this forum say in that these won't work only the 200.oo ones like elite and rx or apex works...if that's the case if i can run 2 of these 20 Lowe's set ups I'm still 160.00 ahead of the game ! Also OP can you give me a parts list for you set up please ?

07-14-2014, 03:44 PM	#26
karicamaro Drives: 2012 v6 camaro Join Date: May 2014 Location: Pa Posts: 47	Bump ?

10-20-2014, 10:29 PM	#28
xstuntman Drives: 2012 Victory Red LFX Join Date: Dec 2012 Location: west central Texas Posts: 1,310	I finally got around to building mine and mounted it today. Thought i heard a faint leak but after spraying some wd40 i didn't find anything. Sitting in the driveway it would rev to 3,000rpm and no more. No audible misses, didn't trip any lights, so for now its off and the car runs fine. I blew through the hose and plugged off the other and everything appeared tight. ???