01-24-2017, 09:35 AM | #1 |
Drives: 2019 ZL1-1LE A10 Join Date: Jan 2017
Location: Oklahoma
Posts: 512
|
Paint Protection or wrap
Does anyone have any experience or recommendations with any time of paint protection?
__________________
19 ZL1-1LE A10
|
01-24-2017, 09:37 AM | #2 |
マスタング = 遅い
Drives: 2017 Chevrolet Camaro SS 1LE Join Date: Aug 2015
Location: Florida
Posts: 7,061
|
I've used Xpel Ultimate on many of my cars, including this one. Great stuff, no more chips, easy to clean, I would never have another nice car without it. Just make sure you get a good installer with experience...
|
01-24-2017, 10:25 AM | #3 |
Drives: 2017 2SS/M6 W/MRC & NPP Join Date: Nov 2016
Location: Mountain House, California
Posts: 252
|
I have Xpel Ultimate on my 2SS...
front bumper, hood, fenders, headlights, A-Pillars, 12" strip over roof, quarter panels, door handle cups and door edges... It was all together about $1900 My installer wasn't the greatest so there's a few spots he's going to have to touch up on. But for the most part I don't have to worry about scratches or rock chips so I don't regret having it done. |
01-24-2017, 10:36 AM | #4 |
Retired from Car mfrs....
Drives: 2LT RS/HR-V Join Date: May 2013
Location: /Fort Lauderdale
Posts: 10,048
|
It's ALL about the installer.....
|
01-24-2017, 10:52 AM | #5 |
Drives: '16 vert 2LT RS NPP Join Date: Jun 2012
Location: Northwest Indiana
Posts: 344
|
True to what Glen said. I like XPEL better than the 3M product but my top-notch installer only does 3M. Rather than risking getting a crappy XPEL install, I'm sticking with the 3M guy who has done 3 of my previous cars.
|
01-24-2017, 03:45 PM | #6 |
Drives: 2016 Camaro SS Join Date: Jan 2017
Location: Smithton, IL
Posts: 26
|
I had XPEL Ultimate installed on my 2016 SS. Had the entire front clip (hood, both fenders, front end), lower rocker panels, behind the rear wheels, A pillars, mirrors, door edges, and about 12 inches on the roof closest to the windshield done. The only issue I've had is where the wrap folded under the hood. The underside didnt want to stick properly so I took it back in to get fixed. All good now. Works and looks great.
|
01-24-2017, 05:27 PM | #7 |
|
I've done the ceramic pro on my entire car. Best paint correction and paint protection I've ever come across. My ride looks like glass,
|
01-24-2017, 08:40 PM | #8 |
Drives: 50th Anni.. coming home 11/01 Join Date: Jul 2014
Location: Toronto. Ontario
Posts: 1,636
|
Another Xpel guy here.. very happy with it. Layered Ceramic Pro over the whole thing.. super happy with the way the car always looks - less dirt from snow and such sticking due to so much water run off.. cleans up very easy and the paint is safe.
__________________
#####################
Built Sept 16/2016 - #2681 of 5955. She came home with me 11/01/16. 50th Anni, 2SS, A8, NPP, NGM Rock Guards, Footwell Lighting, Black Bow Ties, Street Warrior Rotors and Pads, Ceramic Pro, 3M PPF, Oracle Ghosted Side Markers, Kooks 2" headers w/hi flow cats. GPI Stage 1 Cam installed at 305,000 kms. |
06-14-2017, 07:50 AM | #9 |
Drives: 2015 2LS Join Date: Mar 2016
Location: Atlanta
Posts: 238
|
I am going to be the one that is negative here. I had XPEL Ultimate installed on my Foose Stallion show car about 2 yrs ago. This was a full car wrap, not partial like many. I was not happy with the quality of the product at the time of installation and was told to let it have time to cure and sit in the sun a few days. To me the defects were in the material itself. I could see faint lines and areas of obvious defect. After going round and round about replacement, I have finally decided to have the wrap removed by the same shop that did the install. Supposedly a very high end shop! They had the car for a week while I was out of the country. When I picked up the car, the paint was ruined. I am not talking a small spot here and there. I am talking large strips of damage. This car had both factory paint and custom paint from Chip Foose. Both had places where clear coat was pulled off and paint peeled all the way to primer.
Took the car to the body shop that I have used and trust for show cars... he could not believe the damage. Almost $5000 in damage. Installer now claims they no longer rep XPEL and will not help. Be careful!!!! On a side note, the material will get water spots and they are not easily removed. I tried everything and nothing worked. Additionally, you don't notice the product is actually yellowing until you have it removed and see how much it has turned in a fairly short period of time. I can't afford to have it repaired right now because of some other obligations. So my prize show car is now going to be sitting under a cover for a few months. UGH!!!!!!
__________________
Last edited by MyLocalDJ; 06-15-2017 at 06:59 AM. Reason: Adding pictures |
06-14-2017, 08:45 AM | #10 | |
Probably doesn't like you
Drives: 2022 WCT ZL1 M6 Join Date: Jun 2015
Location: Boston-ish
Posts: 1,299
|
Quote:
Mine is going in tomorrow to the folks who did my C7. Fingers crossed.
__________________
I hope the 6th gen Camaro has a melodious horn trumpet. I'll tootel it at the ladies, yelling out "Hi hi." - RenegadeXR
كافر ΜΟΛΩΝ ΛΑΒΕ железобетонное очко Quod gratis asseritur, gratis negatur. There is an unequal amount of good and bad in most things, the trick is to work out the ratio and act accordingly. |
|
06-15-2017, 07:23 AM | #11 | |
Drives: 2015 2LS Join Date: Mar 2016
Location: Atlanta
Posts: 238
|
Quote:
Good luck... I understand there were some potentially bad lots at one time. Mine was about 2 years old. I had originally had the car wrapped for about 7 years and had to have it removed because of a stupid asphalt driver that did not secure his tailgate and took out 7 show cars, including mine. The wrap did its job back then and protected the paint but the wrap had to be replaced. The replacement was with the XPEL Ultimate or at least that is what the shop said they sold me. See my pictures from the previous post. I will add that the wrap that had been on the car for 7 years came off without any problems and the damage above was on the same paint that had endured the wrap removal previously without damage. Different manufacturers product.
__________________
|
|
06-20-2017, 02:47 PM | #12 | |
Drives: 18' Hyper Blue Camaro 2SS Join Date: Nov 2016
Location: Pittsburgh PA
Posts: 34
|
Quote:
I just called a local shop that told me to go on xpel's website to look at the prices of the pieces, and then they would charge several hundred for labor. But seems like the prices for this stuff adds up. I just added up what you said, which is what I pretty much want to get and I get a total of 3300! Is that because your installer wasn't using templates from online like all custom? |
|
06-21-2017, 06:40 AM | #13 | |
Drives: 2015 2LS Join Date: Mar 2016
Location: Atlanta
Posts: 238
|
Quote:
My price on the wrap for a complete car was $3200 the first one and $4000 for the second. Custom cut for some and precut for some panels.
__________________
|
|
|
|
Post Reply
|
|
|