09-14-2014, 10:09 PM | #1 |
Drives: 2013 Black 2LS Join Date: Sep 2012
Location: Lawrence, KS
Posts: 13
|
Catch Can Mounting Help
Hello,
After driving 17k miles, I just noticed the catch can is a must have... I'm looking for elite catch can 2nd generation. Should I choose LFX rear mount bracket if I want them look like in the picture. http://www.eliteengineeringusa.com/e...-catch-can-e2/ Also, should I clean oil left by these 17k mile before install? if so, how? Thank you! |
09-14-2014, 10:14 PM | #2 |
|
I attached mine to the fuse box. There is a nice empty mounting hole there already that worked perfectly !
__________________
'14 1LE, Recaro, Cammed, Headers, Hi Flows, CAI, Tuned, 486 RWHP
https://www.youtube.com/watch?v=H57UfKCO0EY&feature=youtu.be |
09-19-2014, 06:02 AM | #3 |
As for cleaning, some have used Sea Foam to clean it. I have yet to do this myself, but I plan to soon.
|
|
02-20-2015, 09:26 AM | #4 |
Drives: 2014 camaro 3.6l Join Date: Jan 2015
Location: Hamilton Alabama
Posts: 20
|
I also just put a catch can on after 17k, I havent cleaned anything but I did check, I had a little oil, not much, in the manifold behind the throttle body, I only cleaned the tb ring for it had dirt around the outside
|
02-20-2015, 11:55 AM | #5 |
Drives: '16 Garnet Red 1SS Join Date: Mar 2014
Location: College Station, TX
Posts: 3,450
|
I'm not sure how different the V6 vs V8 bays are though.
__________________
'16 Camaro 1SS
'18 Miata GT Gone: '01 Camaro, '14 Camaro, '90 Miata |
02-20-2015, 02:52 PM | #6 |
ZYJ
Drives: 2017 1SS Camaro/6 speed Join Date: Sep 2014
Location: Miami, FL
Posts: 1,346
|
This is mine, 2014 V6. Ordered from Typer, JDP Motorsport. 150$. The name for the fitting is shiny nickle.
Here are two pictures, one is no aftermarket intake, and one with aftermarket intake. |
02-20-2015, 03:39 PM | #7 | |
|
Quote:
I would like to clean the intake manifold. But I've heard it is pricey. How much would it cost to have this done ?
__________________
Specs
TSP Stage 2 Boosted Cam 227/235 at 114 LSA Fore Innovation Triple pump staged (Walbro 342 primary and 2x Walbro 450 secondaries) Procharger D1x with a 3.85 pulley ID1050x Injectors Flex Fuel Sensor Monster LT1 Twin Disk Clutch Holley Sniper Efi Intake Manifold NW 103mm Boosted TB 747rwhp at 12psi on E85 |
|
02-21-2015, 12:23 PM | #8 |
Drives: 2024 Camaro 2SS CE Convertible Join Date: Jul 2013
Location: Texas
Posts: 1,317
|
Couldn't get mine to fit that way with the factory air plenum. Good thing the hose they sent with it was plenty because I had to turn the fitting pointing toward the front and route the hose U shaped to it.
|
|
|
|
|