Dipped My Spoiler and Front Lip - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

B_Rian · 01-12-2015, 12:21 PM

had a little fun with plasti dip yesterday

Spoiler Removed

I want to do the front bowtie soon, and remove the one on the rear

truckstoy · 01-12-2015, 03:03 PM

was the spoiler hard to remove? want to do mine as well. I did the front same as you & removed the rear bowtie. looks better without it.

mike

B_Rian · 01-12-2015, 03:35 PM

It wasn't too hard but I did run into a couple of issues. The first was one of the screws would not budge. I had just bought a 10mm socket screwdriver but it was too short for the two screws toward the middle of the spoiler. I ended up taping a butter knife to the handle of the screwdriver to give me extra grip to unscrew. The second issue was after all the screws were out, there was one other small, white, plastic piece holding the spoiler down. I just pulled on the spoiler until the plastic piece broke off. I still don't know what the purpose of that piece was.

BAD DAB · 01-12-2015, 07:52 PM

Nice!

Homer2 · 01-12-2015, 07:55 PM

I am going to dip my lip in the spring... exactly as you have. Good to see.

01-12-2015, 12:21 PM	#1
B_Rian Drives: 2014 2SS Join Date: Feb 2014 Location: Georgia Posts: 200	Dipped My Spoiler and Front Lip had a little fun with plasti dip yesterday Spoiler Removed I want to do the front bowtie soon, and remove the one on the rear

01-12-2015, 07:52 PM	#4
BAD DAB Drives: 2010 Camaro 2SS/RS Black & Silver Join Date: Aug 2010 Location: Richmond, VA Posts: 8,228 View My Garage	Nice! __________________ STAINLESS WORKS HEADERS-TUNED BY JANNETTY RACING-C.A.I. INTAKE-TAYLOR 409 WIRES-SOLO AXLE BACK EXHAUST-ELITE CATCH CAN

01-12-2015, 07:55 PM	#5
Homer2 Drives: 50th Anni.. coming home 11/01 Join Date: Jul 2014 Location: Toronto. Ontario Posts: 1,636	I am going to dip my lip in the spring... exactly as you have. Good to see. __________________ ##################### Built Sept 16/2016 - #2681 of 5955. She came home with me 11/01/16. 50th Anni, 2SS, A8, NPP, NGM Rock Guards, Footwell Lighting, Black Bow Ties, Street Warrior Rotors and Pads, Ceramic Pro, 3M PPF, Oracle Ghosted Side Markers, Kooks 2" headers w/hi flow cats. GPI Stage 1 Cam installed at 305,000 kms.

01-12-2015, 03:03 PM	#2
truckstoy Drives: 2014 Chevy Camaro 2LT/RS Join Date: Jul 2009 Location: Scotch Plains, NJ Posts: 61	was the spoiler hard to remove? want to do mine as well. I did the front same as you & removed the rear bowtie. looks better without it. mike

01-12-2015, 03:35 PM	#3
B_Rian Drives: 2014 2SS Join Date: Feb 2014 Location: Georgia Posts: 200	It wasn't too hard but I did run into a couple of issues. The first was one of the screws would not budge. I had just bought a 10mm socket screwdriver but it was too short for the two screws toward the middle of the spoiler. I ended up taping a butter knife to the handle of the screwdriver to give me extra grip to unscrew. The second issue was after all the screws were out, there was one other small, white, plastic piece holding the spoiler down. I just pulled on the spoiler until the plastic piece broke off. I still don't know what the purpose of that piece was.