Quote:
Originally Posted by purpleRac3r
I've looked at those. They are rather small and made of hollow square aluminum tube, roughly an inch across. They are solidly bolted to the main frame, just like C5 &C6 Corvettes. However since they are such light material I strongly do NOT recommend using them as jacking points. They might be ok in a pinch, such as with the "bumper savers" but they have no capacity for holding the weight of the car for extended lengths of time. Play it safe - use only the factory recommended support locations.
|
Same thoughts here about those 2 points. I'm planning on installing bumper savers soon and assume the upper bracket of the savers much rest up agains the frame (I hope).