Quote:
Originally Posted by Knockoutpie
http://www.camaro5.com/forums/attach...1&d=1458965033
Attachment 783984
Just wired to a 3.5mm mono plug (had to solder) and then used a blue and red wire to connect the mic, I used 2 pins also. I bought a rectifier (idk what that is) but it was from RadioShack and cut the pins off and solders the wires to those and then plugged the pins in the microphone harness
|
I need help with this.
I would too like to retain the in vehicle's mic.
Thanks.