My 1LE is getting a better brake upgrade
Due to an unforeseen circumstance I needed new front calipers. I over torqued my bleeders in my 6 piston V calipers last fall at the track (knowingly) and then the car wasn't tracked again until this past Saturday. The torque and heat from the race pads seized the bleeders into place. Friday night I sheared off both LH and RH front caliper bleeders......so I bleed the inside of both and ran at the track as planned.
I had planned on upgrading the Vs with the 2015+ Corvette Z06 non-CCB vented pistons..... But these now seem appropriate. I will fix the Vs later.
Matt.
|