Quote:
Originally Posted by ayousef
whats the point of the center one being black? Also how high are the washers it also seems that you are loweing your ground clearance by having the washers so you will hit them more often than not having any washers at all.
Im thinking the washers had to be shorter/thinner?
|
The reason I make the center black is because it will be in view easier because it is placed close to the front.
We do not have to make the center black, I was doing that for the customers do not need to have them all black.
maybe I should come out with a pole and see if that is what you all would like.
The washers
only add 1/8 extra to the bottom. the OEM screws stick down 1/8 inch. When you use the Splitter Washers they come with screws and the total is 1/4. so the net ground clearance is only 1/8 inch more. That is nothing if you compare what it will do if you scrape the OEM screws off. The splitter washers are only .25 or 1/4in in depth, the screws you remove are over 1/8in in depth.