|
Pretty sure the Mantic instructions said a light coat of grease on the input shaft. I could be wrong, but I did the same thing, sliding the clutch discs on to the input shaft to make sure they were all sliding freely. Of course I spray brake clean in there from time to time, so it might be long gone too.
__________________
2010 SS - On3 kit with downpipe cutout, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1/1LE brakes.
2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. ZL1 brakes.
|