Oil Cooler Options for the 5th Gen
It might be a long read but this is about as comprehensive for the 5 Gen as I could put together. Mine has been in service 2020. Hope this helps.
I need to mention that the lower grill itself will need clearance modifications if the cooler is mounted where mine is. This is done with removal of the front fascia, safety glasses and gloves and with the use of a hot knife and a small carbon fiber wheel in a small grinder or Dremel. It will require a lot of trial fitting. Take time, be patient, don't go savage and it can be done for a clean factory install look.
Last edited by PoleCat2SSRS2010; 05-16-2023 at 10:11 PM.
|