Quote:
Originally Posted by paradigm
I ended up getting a set of 19x11" et11 and 19x12” et41 ARC8 wheels.
Looks like I may need a 3mm spacer out front to clear the MRC shocks. What happens if I do not adjust the camber ~2 degrees?
|
I have the same wheels, but currently do not have the camber maxed out at the strut, which gives me some extra clearance. I am using Vorshlag camber plates, with my current camber adjustment at the strut the plates max out at 3.7 degrees.
If I didn't have camber plates, I'd max out stock camber, so ~2.5, do a strut grind, and then add 3mm spacers if needed.