|
Bumper cover removal continued
Bag 2-B bottom air dam
12 7 mm bolts around perimeter of spoiler lower air dam. (2-g-i)
Bag 2-C upper
3 t-15 and 1 tree push pin per side. Driver 2C-A passenger 2C-b. Parts box 1
Recommend automotive grade painters tape on either side of fender and bumper cover for removal to help reduce potential for scratches. Also two people would obviously be easier but you can be done by oneself as I just did.
Bumper cover will stand up on its own with 1le splitter.
Latch plate cover. (Has Chevy performance emblem). Bag 3 and part 3. Parts box 1
4 10mm bolts and 1 tree push pin on passenger. Do Not undo tor X bolts as they are adjustment screws!
|